11-24 Dodge (Ram) 2500/3500 6.7L Cummins Killer Grid Heater Upgrade Kit

Description

The Killer Grid Heater Upgrade Kit is purpose-built to address a major flaw in the 6.7L Cummins engine that can result in total engine destruction. The problem lies in the electrical connection to the intake grid heater. When powering the grid heater, 200 amps pass through a small bolt and nut inside the intake and over time is known to deteriorate and eventually arc and break off. This nut drops into the engine, leading to extensive damage to the piston, head, and valves. There are several solutions currently on the market addressing this issue, but they are very costly upgrades, they drastically reduce the amount of heat available to the engine and typically require tuning or don'(TM)t work well in cold climates. This kit upgrades that flawed electrical circuit by eliminating the problematic bolt and nut inside the intake while retaining stock functionality of the heater, is cost-effective, and is easy to install.

Features & benefits

• Patent pending
• Self-locking threads built into the lower busbar which will prevent the connection from backing out and compromising electrical connection
• Easy installation with minor modification required for 2007-2012 applications (see note in About This Product section below)
• Self Locking Threads Built Into The Lower Busbar To Prevent The Connection From Backing Out And Compromising Connection
• Eliminates both problematic nuts found in the OE grid heater by fastening directly into the lower busbar
• Kit includes replacement hardware and gaskets, along with special tools required for the job
• Kit Includes Replacement Hardware And Gaskets; Along w/Special Tools Required For The Job
• Eliminates The Problematic Grid Heater Bolt And Nut That Could Lead To Engine Damage
• Allows for full heat output with the stock intake grid heater
• Allows For Full Heat Output w/The Stock Intake Grid Heater
• Easy Installation w/No Modifications Or Tuning Required
• SEMA Certification No. SC-BDD01-0135
• Is Fully Emissions Compliant
• Fully emissions compliant

Videos and guides

Magnuson-Moss Warranty Act

Legally, a vehicle manufacturer cannot void the warranty on a vehicle due to an aftermarket part unless they can prove that the aftermarket part caused or contributed to the failure in the vehicle (per the Magnuson Moss Warranty Act (15 U.S.C. 2302(C)).