Features
- MULTI SURFACE CERAMIC SPRAY: Protects paint, glass, metal and plastic
- ULTRA SLICK FINISH: Adds slickness to resist abrasion and contamination
- HYDROPHILIC PROTECTION: Accelerates drying and reduces water spotting with sheeting hydrophilicy
- DRAMATIC GLOSS AND CLARITY: Amplifies shine up to 3x on paintwork and enhances clarity on glass
Product Details
12 oz. Nano LS-10 Multi Surface Ceramic Coating by Dr. Beasley's®. NANO LS-10is a multi surface ceramic coating spray. It applies a slick, water sheeting (hydrophilic) ceramic coating that protects paint, glass, plastic and more for up to 1 year. Use it to add protection, enhance shine and create slickness.
WHAT IS NANO LS-10?
Nano LS-10 is a ceramic coating spray that protects paint, glass, metal, plastic and other exterior surfaces.
WHY WAS IT MADE?
Dr. Beasley’s Founder/R&D Director Jim Lafeber engineered this product in response to the explosion of dubiously “ceramic” spray products seen in the past decade. These products were easy to apply but rarely protected like a genuine ceramic coating, instead using ingredients from old technology like sealants.
WHAT IS IT ENGINEERED FOR?
In his formulation, Jim focused heavily on:
- Ensuring a durable bond with minimal prep
- “Sheeting” or “water moving” hydrophilicy
- Slickness and contaminant resistance Intensity of gloss
Like our other technologies, Jim achieved this engineering feat by borrowing technologies and ideas from niche industries in aeronautics and surface engineering.
DIRECTIONS
The Nano LS-10 “Two Towel Method” (For Outdoor Application Out of Sun)
- 1. Mist Nano LS-10 onto a panel with even coverage (TIP: To extend durability, be sure the finish is as clean as possible before application.)
- 2. Wipe Towel One across the panel in a crosshatch pattern to ensure even and complete coverage of the panel. (TIP: To maximize towel usage, fold into fourths and switch sides when saturated.)
- 3. Use Towel Two to buff off any remaining excess. Move on to the next panel and repeat until all desired surfaces are coated. (TIP: You can use Nano LS-10 on plastic trim, badging, headlights and chrome in addition to the paint.)
The Nano LS-10 “One Towel Method” (For Outdoor Application In Sun)
- 1. Mist Nano LS-10 onto a panel or small area. If working with a larger panel, divide into smaller sections.
- 2. Use a single towel to level and buff off the applied LS-10. (TIP: If high spots occur, just re-apply Nano LS-10 to re-emulsify the product and level!)
- 3. Move on to the next panel or small area and repeat.
The Nano LS-10 “Fast Two Towel Method” (For Indoor Application)
- 1. Mist Nano LS-10 onto half of the vehicle (Half the hood, driver’s side panels, half the roof, etc)
- 2. Use Towel One across the vehicle half, being sure to get full and even coverage.
- 3. Use Towel Two to buff off any remaining excess on the vehicle half.
- 4. Repeat on the other half of the vehicle.
How to Maintain a Nano LS-10 Coating
Much like a “pro-style” ceramic coating, you’ll get back what you put in with Nano LS-10. So the better you maintain the coating, the longer you’ll see it protecting!
- Leave the vehicle undisturbed for at least one hour after applying Nano LS-10.
- For maximum durability, avoid washing for one week after applying Nano LS-10.
- Wash every two weeks (or as needed) with Dr. Beasley’s Ceramic Body Wash.
- No need to use Dr. Beasley’s AdvanceCoat: Gloss — just re-apply when needed!