Features
- PROTECTS MATTE PAINT FINISHES: Shields matte paint finishes to resist stains and contamination
- MAINTAINS MATTE LOOK: Engineered nanostructure preserves matte appearance and adds no gloss
- HYDROPHOBIC SELF-CLEANING: Active water repellency pushes off water and aids in self-cleaning
- LONG-LASTING DURABILITY
Product Details
2 oz. Matte Paint Coating by Dr. Beasley's®. Dr. Beasley’s MATTE PAINT COATING protects matte & satin paint from stains, soiling and contaminants to preserve the finish in factory condition. Engineered for active hydrophobicity, Matte Paint Coating repels water to self-clean. Unlike other nanocoatings, it retains the matte finish and will not add gloss.
YES TO PROTECTION. NO TO SHINE.
Matte Paint Coating protects matte & satin paint from stains, soiling and contaminants to preserve the finish in factory condition. Engineered for active hydrophobicity, Matte Paint Coating repels water to self-clean. Unlike other nanocoatings, it retains the matte finish and will not add gloss.
Keeps Matte Finishes Protected
Stains and other harmful contaminants won’t stick as easily with Matte Paint Coating applied, defending the finish against permanent damage.
Hydrophobic For Self-Cleaning
Matte Paint Coating’s hydrophobic properties actively repel water, taking contamination along with it for a self-cleaning effect.
Preserves Matte Finish Appearance
Unlike conventional ceramic nanocoatings, Matte Paint Coating preserves the muted sheen of a matte finish rather than filling it in, preserving a factory appearance.
Year-Round Protection
Matte Paint Coating protects matte paint for longer than any wax or sealant, shielding daily drivers for 1+ years and garaged vehicles for up to 3.
Compatible With All Finishes
Have satin paint? Matte Paint Coating works just as well. Have partial matte and partial glossy? Protect them both - it works on glossy paint, too.
Approved by Hyundai, Genesis, Kia & More
Many OEMs have tested Matte Paint Coating against competitors, and time and time again Dr. Beasley’s was rated #1 for preserving the matte look.
DIRECTIONS
Application Instructions
- Ensure surface is clean. Use Matte Body Wash to remove loose contaminants and Matte Paint Cleanser to spot clean more stubborn messes. For optimal bonding, decontaminate with Matte Decon prior to application.
- Mist water onto a panel. For optimal bonding, use distilled water.
- Lightly shake the Matte Paint Coating bottle.
- Place 10 to 15 drops onto applicator.
- Apply to wet panel in circular or straight back-and-forth motions, being sure to get full coverage.
- Immediately wipe panel down completely with a fresh microfiber towel.
- Repeat steps 2-6 until entire vehicle is covered, applying 5-6 more drops with each panel.
Dr. Beasley's Suggests
Do not apply in direct sunlight.
Avoid washing vehicle or getting it wet for one week after application.
Follow our Always test in an inconspicuous area first to check for surface compatibility.