Starting February 12, 2018 Feuling Parts offers a 2 year warranty on parts installed by authorized installers, with completed requirements and online registration form. If parts are installed by a unauthorized installer or the warranty registration is not completed the standard 1 year warranty will apply. All parts are guaranteed to the original purchaser to be free of manufacturing defects in materials and workmanship for a period of twelve (12) months from the date of purchase.
All parts are guaranteed to the original purchaser to be free of manufacturing defects in materials and workmanship for a period of twelve (12) months from the date of purchase. Merchandise that fails to conform to these conditions will be repaired or replaced at FOP’s option if the parts are sent to FOP by the purchaser within the (12) month warranty period. In the event warranty service is required, the original purchaser must notify FOP of the problem immediately. A part that is suspect of being defective must not be replaced without prior authorization from FOP. After an evaluation has been made by FOP and the part was found to be defective, repair, replacement or refund will be granted. Excessive flywheel pinion shaft run out will damage camplate and oil pump and or cause engine damage and or failure. Damage to Feuling Parts products from excessive pinion shaft run out will void manufacturer’s warranty.
Starting February 12, 2018 an additional twelve (12) month warranty (totaling twenty-four months from the date of install/purchase) is available on internal engine components manufactured by FOP,when the parts have been installed by an authorized installer. To achieve the additional warranty term the installer must fill out an online registration form through the online portal or mail in the warranty registration card included in the kit. Installers must provide the following information at the time of install for warranty validation:
Dealer Information.
Customer Information.
Vehicle Information (Year, Make, Model, VIN # and Mileage).
Pinion Shaft Runout.
Oil tank must be dropped and cleaned
Invoice/Work Order Number.
Pinion shaft runout must be within FOP’s specification (Under 0.005”) at time of install. If an oiling system, lifters,oil pump and/or camplate is being installed the oil pan must be dropped and flushed to qualify for the extended warranty period.
Any engine that has a prior engine failure leading to the current build/upgrades is required to be completely flushed before new components are installed. If the bike is equipped with an oil cooler the cooler must be flushed or replaced to maintain warranty.
In the event that a customer or installer feels that the product/s is faulty once installed they must first contact FOP prior to disassembling the engine for diagnosis. If the FOP part/s is found defective within the warranty period the part/s will be repaired or replaced. FOP is not responsible for any consequential damage that may occur, diagnosis time and/or labor.
FOP shall have no obligation in the event an FOP part is modified by any other person or organization, or if another manufacturer’s part is substituted for one provided by FOP. FOP shall have no obligation if an FOP part becomes defective in whole or in part as a result of improper installation, improper break-in or maintenance, improper use, abnormal operation, or any other misuse or mistreatment.
The installation of parts may void or otherwise adversely affect your factory warranty. In addition, such installation and use may violate certain federal, state and local laws, rules and ordinances as well as other laws when used on motor vehicles operated on public highways, especially in states where pollution laws may apply. Always check with federal, state, and local laws before modifying your motorcycle. It is the sole and exclusive responsibility of the user to determine the suitability of the product for his/her use, and the user shall assume all legal, personal injury risk and liability and all other obligations, duties and risks associated therewith. Our high performance parts, engines and motorcycles are intended for experienced riders only.