Vehicle Fitment
| Make | Model | Year |
|---|---|---|
| Kawasaki | Ninja ZX-10R | 2016-2019, 2021 |
| Ninja ZX-10RR | 2017-2019, 2021 |
Product Details
Works 2 4 - 2 - 1 Carbon Fiber Exhaust System by Graves Motorsports®. Graves Motorsports 2016-2021 Kawasaki ZX-10R / ZX-10RR Full WORKS2 Titanium Exhaust System with carbon fiber silencer. Graves' precise engineering develops precision products that are designed to outlook, outperform and outlast the competition. Graves Exhaust systems are designed for the elite rider seeking top of the line performance, fit, finish and value. This exhaust system was developed using the same technology that has powered the Graves Racing Team to 25 Professional AMA National Championships including 9 Superbike Championship titles and 3 Side x Side Pro Titles (Pro Stock and Pro Mod UTV).
Notes
- This product is intended for closed course competition use only. Use of this product for any other purpose is strictly prohibited
- Remember to check your local or state laws regarding vehicle noise restrictions
Specifications
| Type: 4 - 2 - 1 |
| End Cap Finish: Titanium |
| Finish: Carbon Fiber |
Features
- Diamond Shaped Silencer Design (Titanium silencer body with Titanium End Cap), configured to balance the ZX6R's body lines and produce the best balance of power
- Strapless silencer design mounts without the use of strap bands around the can using a tap mounted bracket that's integrated into the can
- This design not only streamlines looks of your bike and saves weight
- Constructed from High Heat Aerospace Grade Titanium that resists breaking down up to 800* Celsius 1472* F
- Stainless exhaust port spigots
- Billet Hard Anodized 7075T651 Aluminum Flanges
- Single Lambda sensors come standard. FTECU active tune sensor adaptability. 18 x1.5
- Advanced welding process showcases laser perfection welds
- Tapered header down pipes (Cores are altered in size and taper length for each motorcycle)
- Optimized Graves Spec flash tune maps available with product purchase (product shown below in up-selling links)
- Graves Full Works System = 7 lbs. (- 17.8 lbs. weight saving over stock)
- Stock Exhaust System = 24.8 lbs.
- Stock DB @ Idle = 77 / Stock DB @ 5000 RPM 83.5
- Graves Cat Back DB @ Idle 88.3 / Graves Cat Back DB @ 5000 RPM 102.5
Graves did not allow compromise in the development of this system. Material diameters, lengths, the silencer core size and length are optimized for maximum power output throughout the throttle and RPM range. Combined with Graves’ exclusive flash tune map this system produces a solid 15+ HP in the midrange and 25+ on the top of the horsepower charts. This tune also removes any computer error codes the bike will have when installing performance exhausts.
Graves use the same 1.00 MM thick wall high heat grade Titanium tubing used on our performance Superbike exhausts. This material is designed special for maximum durability and oxidation resistance up to 800*Celsius / 1472*Fahrenheit. It is designed to live at almost twice the temperature of normal Grade2 Titanium. The tubes are precision bent and cut with the latest equipment available. The tubing is then welded in fixtures designed so that repeat-ability is second to none. It comes with a single Lambda receiver bung for on track data logging or Dyno tuning. The spring tabs are made from 4MM thick Titanium wire for long life.
The silencer is has a Titanium entrance cap and attaches to the Carbon silencer body. The silencer is hung with a carbon fiber hanger strap for the cleanest look possible. The silencer body attaches to the end caps with stainless aircraft grade rivets and Titanium silencer bands. The inter core tube is made of stainless that slips over the entrance and into the exit cap that is made of Titanium and accented with a titanium beauty cover with a 60* slash cut.
Graves Motorsports® was born in 1990 out of the dreams, desire, and dedication. Both a manufacturer of performance accessories and a professional road racing team, Graves Motorsports provides privateer racers with factory-quality, race-proven performance parts. Dedicated to total customer satisfaction, the company has a growing list of trick performance items available for the Yamaha, Suzuki as well as other brands. Graves Motorsports makes rear sets, bars, exhaust systems, velocity stacks, suspension components, marker lights, fender eliminator kits, and on and on. At Graves Motorsports, they believe that craftsmanship leads to championships! All Graves Motorsports parts are designed with the utmost attention to detail using the latest equipment to ensure winning performance and unbeatable longevity.
Related Links
Reviews
(0)Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.
Questions and Answers
(0)If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!