DISCONTINUED-UNIVERSAL, FLAT WELD-ON EXHAUST HANGER; 3 IN. TUBE DIA.; MILD STEEL

Description

Properly hanging your vehicle?s exhaust system is crucial to the system?s longevity. In fact, missing or improperly located exhaust hangers don?t just shorten the life of your exhaust system, they increase the forces generated on your vehicles headers, and can lead to cracked welds near the header collectors, as well as, cracks where the header tubes are welded to the head flange. Hedman?s Universal-use weld-on exhaust hanger brackets allow you to correctly position the exhaust hangers on your exhaust to ensure a secure installation, and reduce the risk of header or exhaust damage. This Flat bracket is for use with 3 in. exhaust systems and includes high temperature grommets that can be installed in one of three different heights, and are for use with hanger rods or bolts that run parallel with the exhaust system. Once welded to the exhaust system, the brackets are attached to the vehicle using standard 3/8 in. diameter exhaust hanger rods (not included), or 3/8 in. diameter bolts (not included).

Hedman Hedders, began as a one man shop in 1954. Bob Hedman, founder of Hedman Hedders, sold his highly sought after exhaust tubes to fellow racers on the salt flats of the Mojave Desert. But, what started out as a way to make a few bucks to pay for Bob's racing hobby, quickly turned into the premier header manufacturer for both the racing and street header marketplaces.\n\nOriginally designed for straightline drag racers, word spread quickly about Hedman's reputation for building headers that gave you the best boost in power for your dollar. It wasn't long before Hedman Hedders was the brand of choice among racing's elite engine builders, racers and race series. Familiar names like Don Garlits, Warren Johnson, Shirley Muldowney, Bob Chandler and his BIG FOOT Race Team, and the IROC series.\n\nHedman Hedders constantly reshapes itself to meet environmental requirements and incorporates computer technology to ensure that its products offer the best performance improvement.\n\nWhether you're a Pro or sportsman racer, Hedman Hedders builds your headers with one goal in mind, optimum performance. Even if you're not a racer, the lessons Hedman learns at the track and on the dyno, make it into every street header we design.

Specifications

Videos and guides

Magnuson-Moss Warranty Act

Legally, a vehicle manufacturer cannot void the warranty on a vehicle due to an aftermarket part unless they can prove that the aftermarket part caused or contributed to the failure in the vehicle (per the Magnuson Moss Warranty Act (15 U.S.C. 2302(C)).