Product Details
Crystal Wash SiO2 Fortified Hydrophobic Shampoo by Nanoskin®. Crystal Wash SiO2 Fortified Hydrophobic Shampoo. Volume: 5 gal. Dilution: 200:1 ~ 400:1. Nanoskin Ultra Line, Crystal Wash adds Hydrophobic protection to your weekly maintenance wash. Having Hydrophobic protection on your vehicle encourages water-borne dirt and contamination to slide away, rather than stick. Treated surfaces stay looking cleaner for longer and because dirt doesn't bond as readily, cleaning the vehicle is much easier! With neutral pH, high lubricity Formula, Crystal Wash is designed to work on its own or to boost existing wax, sealant or ceramic coating layers. It is safe on all surfaces including paint, rims, glass and plastic and it will add instant protection to these surfaces, or boost any protection already applied. Simply wash your vehicle the same way you would with any other auto shampoo, rinse off, and stand back to admire the results.
Specifications
| Dilutions Hand Washing: 200:1 - 400:1 |
| Dilutions Pressure Foam Cannon: 10 : 1 |
| Dilutions Evergreen Shampoo Gun: 200:1 |
Features
- Wash and Coat in One Simple Step
- Creates Thick, Clinging Foam Which Rinses Away to Leave a Hydrophobic Finish
- Causes Dirty Water and Contamination to Bead Away from Treated Surfaces
- Leaves behind an Incredible Slick, Glass-Like Protection
- Built to offer excellent functionality and quality
- Made with the use of the most innovative technologies
- Designed and tested with the utmost safety in mind
Directions:
For Hand Washing and Evergreen Shampoo Gun
1. Mix 0.6 oz (15-20 ml) of Crystal Wash per Gallon of Water in a Bucket.
2. Rinse Surface with Water to Flush Away Loose Dirt.
3. Wash Entire Car with Wash Mitt in Straight Motion. Begin with the Roof, and Work the Suds Down to the Hood, Trunk and Sides.
4. Rinse Well with Clean Water.
5. Dry with a Suitable Drying Towel.
For Pressure Foam Cannon
1. Pour 3 oz (90-100 ml) of Crystal Wash into a Standard Foam Cannon Bottle and Mix with Water.
2. Rinse Surface with Water to Flush Away Loose Dirt.
3. Spray Onto the Surface, Wash with Wash Mitt in Straight Motion. Begin with the Roof, and Work the Suds Down to the Hood, Trunk and Sides.
4. Rinse Well with Clean Water.
5. Dry with Suitable Drying Towel.
With headquarters in California, USA, Nanoskin® is committed to manufacturing the highest quality and professional automotive appearance reconditioning products. The company’s inventory encompasses many premium solvents, removers, waxes, polymers, paint sealants, polishes, pads, brushes, etc. Nanoskin relentlessly follows its goal to exceed the expectations of every customer by using advanced nanotechnology formula thus optimizing functionality and efficiency. It boasts two worldwide patented systems - Autoscrub and Evergreen. The first one sets the new standard for surface decontamination while the second one brings an environmentally friendly green low-moisture cleaning solution.