RMStator® RM22956 - Stator + Voltage Regulator Rectifier Kit

You save 15% off the items price combined, when buying a kit.
Brand new aftermarket high output stator and voltage regulator rectifier kit
Direct replacement to your original unit.
Plug-and-play, direct fit, easy installation.
All product shipped are tested

Brand new high output aftermarket stator
Pick up pulsar coil included
Connector included
Rubber grommet included
Highest grade lamination materials
Highest grade copper windings, resistant to 200 degrees Celsius.
20% MORE OUTPUT OVER STOCK, WORKS WITH ALL OTHER OEM COMPONENTS.
Brand new aftermarket voltage regulator rectifier
You must re-install one of your original connectors
The Quality exceeds the OEM equipment
Improved heat sink and charging capabilities
Higher grade of electric components.

Before installing your new stator:
Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".
Before installing your new regulator/rectifier:
Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors.
Warning:
Risk of electric shock. Disconnect the battery before servicing.
Ensure proper installation by a qualified technician to avoid malfunction.