Product Details
Mag-1 Air Boots by Sidi®. Sidi, always the technology market leader has taken race boots in an all new direction with the Mag-1. Combining an innovative internal bracing system with well chosen design elements and materials to create a very lightweight, yet ultra-protective race boot system. All the same features as the standard Mag-1 with the addition of a perforated outer for maximum air flow. The Mag-1 boot comes in at 4.4pounds, over 14oz. or 17% lighter than the Vortice boot! The rear upper is made in polyurethane, and is assembled to the boot with two screws: one on the outside under the Tecno-3 Magnetic mechanism, the other on the inside which holds the micrometric adjuster strap.
Features
- The screws support and block the internal support system which is made with carbon fiber beams, making up the frame of the boot
- An all new Micrometric Tecno-3 magnetic closure mechanism is easy and quick to use as well as being highly adjustable and light in weight
- The Tecno-3 Magnetic closures close the boot with an extremely resistant steel wire, which is hooked to the clip with the aid of a magnet
- Arch and Achilles areas are covered with Sidi's exclusive elastic textile and injection polyurethane comfort panels
- The arch area utilizes two TPU bands next to the Tecno-3 Magnetic closures, for a maximum support and wrap of the arches
- Asymmetric and shaped shock absorbing heel cup, smooth and flat inside, for more adherence with the bike,with shock absorbing system in the back and outside
- The shell and the shock absorbing system are replaceable through a screw and an interlocking system
- Nylon inner sole with removable arch support pad
- Dual compound sole
- Technomicro is used as a base material
- Double stitched in all high stress areas
- All bolt on parts (shin, heel,closures, and toe slider) are replaceable
- TPU toe shift pad
- Perforated Teflon treated nylon lining in the boots upper with a soft and comfortable Cambrelle lining used in the toe area
- All screws that attach the various technical parts are recessed so as not to damage the bike
- The toe slider is made in nylon reinforced with fiberglass. It is fitted with a new air intake and an innovative alloy insert
- The Mag-1 has a widely adjustable calf area that can accommodate riders with up to an 15-inch calf diameter 11.5-inches
- Will provide comfort, durability, and protection
- Made from the finest quality materials
- Unique design to meet your tastes and preferences
Upper/Material:
Perforated Technomicro Microfibre
Lined:
Lined With Air Teflon Mesh
Sole:
Rubber Top Sole
Technology:
Replaceable Shin Plate
Tecno 3 Magnetic Closure System
Internal Support System
No Zip
Adjustable Calf Area
Tpu Bands To Wrap Of The Arches
Asymmetric And Shaped Heel Cup
Shift Pad
Slider With Alloy Insert And Air Ventilation System Integrated
When constructing most of Sidi boots, Sidi uses a new generation material called "Technomicro". Technomicro is a composite microfiber material created from strands that are so fine, each one is less than one thousand the thickness of silk. These fibers act like natural leather skin, but with the advantage of better strength, softer texture and lighter weight. Technomicro is also water resistant, highly resistant to abrasion and tearing and is easy to clean and maintain. Technomicro doesn't stain and offers reduced weight, more flexibility and a better feel than leather or other synthetic material boots
Replaceable shin plate in polyurethane
An all new Micrometric Tecno-3 magnetic closure mechanism is easy and quick to use as well as being highly adjustable and light in weight.
The TECNO-3 Magnetic closures close the boot with an extremely resistant steel wire, that is hooked to the clip with the aid of a magnet. Mechanisms and retaining clips are replaceable.
Arch and Achilles areas are covered with Sidi's exclusive elastic textile and injection molded polyurethane comfort panels. The arch area utilizes two TPU bands next to the TECNO-3 Magnetic closures, for a maximum support and wrap of the arches
The rear upper is made in polyurethane, and is assembled to the boot with two screws: one on the outside under the TECNO-3 Magnetic mechanism, the other on the inside which holds the micrometric adjuster strap. The screws support and block the internal support system which is made with carbon fiber beams, making up the frame of the boot.
This system allows excellent flex movement front-to-back while being firm side-to-side.
The Tecno-3 Magnetic mechanism and the micrometric memory strap adjust the leg circumference to fit around the calf muscle.
The Tecno-3 magnetic mechanism and the micrometric memory strap adjust the leg circumference to fit around the calf muscle
The toe slider is made in nylon reinforced with fiberglass. It is fitted with a new air intake and an innovative alloy insert
Asymmetric and shaped shock absorbing heel cup, smooth and flat inside, for more adherence with the bike, with shock absorbing system in the back and outside. The shell and the shock absorbing system are replaceable through a screw and an interlocking system
The "CE" marking means that the product meets the basic health and safety requirements of European Directive 89/686/EEC.
'The Mag-1 boot comes in at 4.4 pounds, over 14oz. Or 17% lighter than the Vortice boot!
The Mag-1 Air has all the same features as the standard Mag-1 with the addition of a perforated outer for maximum air flow.
The rear upper is made in polyurethane, and is assembled to the boot with two screws: one on the outside under theTecno-3 Magnetic mechanism, the other on the inside which holds the micrometric adjuster strap.
The screws support and block the internal support system which is made with carbon fiber beams, making up the frame of the boot. This system allows excellent movement front-to-back while being firm side-to-side.
Micrometric Tecno-3 magnetic closure mechanism is easy and quick to use as well as being highly adjustable and light in weight. The Tecno-3 Magnetic closures close the boot with an extremely strong stainless steel wire, which is hooked to the clip with the aid of a magnet.
Arch and Achilles areas are covered with Sidi's exclusive elastic textile and injection molded polyurethane comfort panels. The arch area utilizes two TPU bands next to the Tecno-3 Magnetic closures, for a maximum support and wrap of the arches.
Technomicro is used as a base material. Technomicro is stronger than leather, softer and requires almost no break-in. It's easier to clean and the colors don't run or fade. It's not affected by water or sweat like leather. Technomicro is laminated for extra strength and longevity.
Tradition, values and commitment combined with an efficient international distribution network make Sidi® a company that is present all over the globe. Because of their guaranteed quality, Sidi footwear has been chosen by millions of athletes. Since 1960 Sidi has researched and developed highly technical footwear in order to achieve the maximum in reliability and comfort. Combining innovation with a half-century of experience; the Sidi brand evokes a passion that goes beyond that of just a company.