Sidi® - Mag-1 Boots

Upper/Material:
Technomicro Microfibre

Lined:
Lined With Air Teflon Mesh

Sole:
Rubber Top Sole

Technology:
Tecno 3 Magnetic Closure System
Internal Support System
No Zip
Adjustable Calf Area
Tpu Bands To Wrap Of The Arches
Asymmetric And Shaped Heel Cup
Replaceable Shin Plate
Shift Pad
Slider With Alloy Insert And Air Ventilation System Integrated

When constructing most of Sidi boots, Sidi uses a new generation material called "Technomicro". Technomicro is a composite microfiber material created from strands that are so fine, each one is less than one thousand the thickness of silk. These fibers act like natural leather skin, but with the advantage of better strength, softer texture and lighter weight. Technomicro is also water resistant, highly resistant to abrasion and tearing and is easy to clean and maintain. Technomicro doesn't stain and offers reduced weight, more flexibility and a better feel than leather or other synthetic material boots

Replaceable shin plate in polyurethane

An all new Micrometric Tecno-3 magnetic closure mechanism is easy and quick to use as well as being highly adjustable and light in weight.
The TECNO-3 Magnetic closures close the boot with an extremely resistant steel wire, that is hooked to the clip with the aid of a magnet. Mechanisms and retaining clips are replaceable.

Arch and Achilles areas are covered with Sidi's exclusive elastic textile and injection molded polyurethane comfort panels. The arch area utilizes two TPU bands next to the TECNO-3 Magnetic closures, for a maximum support and wrap of the arches

The rear upper is made in polyurethane, and is assembled to the boot with two screws: one on the outside under the TECNO-3 Magnetic mechanism, the other on the inside which holds the micrometric adjuster strap. The screws support and block the internal support system which is made with carbon fiber beams, making up the frame of the boot.
This system allows excellent flex movement front-to-back while being firm side-to-side.
The Tecno-3 Magnetic mechanism and the micrometric memory strap adjust the leg circumference to fit around the calf muscle.

The toe slider is made in nylon reinforced with fiberglass. It is fitted with a new air intake and an innovative alloy insert

Asymmetric and shaped shock absorbing heel cup, smooth and flat inside, for more adherence with the bike, with shock absorbing system in the back and outside. The shell and the shock absorbing system are replaceable through a screw and an interlocking system

The "CE" marking means that the product meets the basic health and safety requirements of European Directive 89/686/EEC.

The Micrometric Tecno-3 magnetic closure mechanism is easy and quick to use as well as being highly adjustable and lightweight. The Tecno-3 Magnetic closures close the boot with an extremely resistant stainless steel wire, which is hooked to the clip with the aid of a magnet.
The Mag-1 incorporates an internal support system which is comprised of carbon fiber beams, making up the frame of the boot. This system allows for excellent movement front-to-back while limiting side-to-side action.
Sidi boots are well known for being lighter than comparable brands, and they continue to make the boots slimmer and lighter. The Mag-1 boot comes in at mere 4.4 pounds, which is 14oz. or 17% lighter than the Vortice boot! With Sidi compared to other brands, 10-20% lighter is the norm, not the exception!
The Tecno-II buckle system goes over the bridge of your foot. With a simple adjustment of the Tecno knob, the internal monofilament line will evenly close and wrap the boot around your foot in micro adjustments for a perfect fit. This system also prevents your foot from sliding forward in a crash thus offering extra protection to your toes.
The patented Tecno VR adjustable calf system is designed to accommodate calves of virtually any size in a clean, supportive and protective design. With a simple adjustment of the Tecno knob the internal monofilament line will evenly close and wrap the boot around your calf in micro adjustments for a perfect fit. A maximum adjustment of 5cm is provided.
Technomicro is used as a base material for many Sidi boots. Technomicro is not just a replacement for leather it is an improvement. Technomicro is stronger than leather, softer and requires almost no break-in. It lasts longer, it's easier to clean and the colors don't run or fade. It's not affected by water or sweat like leather. Technomicro is also laminated for extra strength and longevity.
Sidi boots do not incorporate inner booties into their design, and for good reason. Booties make the design larger and cumbersome; add to the boots thickness, which interferes with shifting, plus the inner booties retain body heat affecting your performance and comfort.
Cambrelle™ is a synthetic lining material used for high end, outdoor footwear. Cambrelle™ is like a base layer for your feet, wicking moisture away and keeping your skin dry and less likely to blister. Cambrelle™ fabric can absorb up to three-and-a-half times its own weight in moisture, which it then releases when the boot is removed.
Every bolt on component of each Sidi boot is available separately. You can change the various components to replace items that have worn or have been damaged in a crash or to make a custom colored boot to match your personal taste.
The Vortices three stage, shock absorbing heel cup is molded in three different densities of plastic, molded into a single element. This system offers a built in shock absorbing range of 3mm. The heel cups internal area is also fully lined with impact resistant thousand-air cell memory foam for an extra level of comfort and added protection.
Sidi air ventilation systems can be opened or closed with a touch of a button depending upon your needs. These vents are incorporated into the replaceable toe scuff pad and helps protect the small and vulnerable foot bones.
The two piece sole is constructed of a rugged polyurethane and rubber blend. It features a removable insert in front of the arch area where most of the wear and tear normally occurs due to sharp metal brake pedals and shift levers. Another patented-exclusive Sidi feature!
The composite inner sole of Sidi boots resists side to side compression, offering greater protection compared to the leather inner soles that Sidi competitors use. The insole features a removable arch support and will never lose its dynamic characteristics, even after months of intense use. Its also water resistant and is designed to withstand high footpeg pressures.