SUMAX-TAYLOR SPIRO-PRO MOTORCYCLE SPARK PLUG WIRES OUTPERFORM THE COMPETITION IN BOTH LOOKS AND PERFORMANCE!
Sumax 8mm Motorcycle Spark Plug Wire sets give you more horse power, more torque and better miles per gallon performance for your Harley Davidson®. Available in a variety of vibrant colors, Company Custom Plug Wire Sets are designed for your specific year and model. You can use these wires with electronic or points ignitions. Further more, Company Spiro Pro motorcycle wires are compatible with all Harley Davidson® ignitions. If you have an aftermarket ignition, please check with manufacturer’s ohm requirement. For very high ohm ratings you can use Company Carbon Core spark plug wire sets. For magnetos and points you can use Company (metallic) core wire sets.
Spiro-Pro 8mm motorcycle plug wire is the top choice of racers and enthusiasts due to its affordable value and overall high performance features. Spiro-Pro’s two-layer 100% silicone inner core & outer jacket keeps the wires flexible for the life of your vehicle maintaining its vibrant color with heat protection to 600º F. Taylor Cable’s Spiro-Pro spark plug wire consists of a high conductive spiral wound core with a Stainless Steel wire and covered with a fluorocarbon conductive material. These spark plug wires feature 350 ohms per foot resistance which provides more fire power to the spark plugs than OEM resistor core wires and has up to 10 times less resistance than standard resistor core wires. It eliminates radio frequency interference (RFI) and is recommended when using a multi spark discharge, electronic ignition systems and other electronic components. Features Taylor Cable’s EXCLUSIVE low profile 100% silicone PROBOOTS® with vibration proof Stainless Steel double spring locking spark plug terminals. Choice of 11 vibrant colors in Universal Wire Sets; Black, Blue, Red, Purple, Yellow, Hot Orange, Hot Lime, Hot Pink, Teal, White and Gray.
100% Made in USA.
Classic Thunder Indian Spark Plug Wire sets
All new tooling for this model had to be done as customers complained about the Indian stock wires poor plug boot fitment. Company new Indian wires will be made with Company Thundervolt 50 core for the best performance.
Sumax has been in business for over 35 years bringing you the latest, state of the art, 100% Made in the U.S.A. Spark Plug Wires and Battery Cables. Over the years, Company have seen the transition in technology from the early metallic and carbon cores to Spiro-Pro cores. Using the Spiro-Pro core, Company achieve ten times the firepower while still offering protection for your bike’s computer and electronics. Spiro-Pro features a two-layer, 100% silicone jacket to withstand temperatures up to 450º F. Each wire is terminated to a specific length and features Taylor’s exclusive, 100% Silicone low profile PRO Comp BOOTS®. Company spark plug boots are designed with Resistors for a tight fit. They are vibration proof and have double spring locking spark plug terminals for a secure connection. Now, more than ever, you have countless choices to achieve a great custom look with professional performance. Sumax calls it, “Performance with Color”. “Old School Looks w/ Modern Technology”
These wires are 7mm Black Silicone covered in Company vintage braided cloth. They feature synthetic jacketing that resists heat, oil, and abrasion. A combination of Kevlar Helically Spiral Wound Core, at 350 ohm per foot resistance, delivers greater spark energy. It also improves power, idle, and fuel efficiency! Company cloth jacket is rated at 450° F.
Sumax Pro 10.4mm Motorcycle Spark Plug Wire sets
All new tooling for this model had to be done as customers complained about the Indian stock wires poor plug boot fitment. Company new Indian wires will be made with Company Thundervolt 50 core for the best performance.
Sumax has been in business for over 35 years bringing you the latest, state of the art, 100% Made in the U.S.A. Spark Plug Wires and Battery Cables. Over the years, Company have seen the transition in technology from the early metallic and carbon cores to Spiro-Pro cores. Using the Spiro-Pro core, Company achieve ten times the firepower while still offering protection for your bike’s computer and electronics. Spiro-Pro features a two-layer, 100% silicone jacket to withstand temperatures up to 600º F. Each wire is terminated to a specific length and features Taylor’s exclusive, 100% Silicone low profile PRO Comp BOOTS®. Company spark plug boots are designed with Resistors for a tight fit. They are vibration proof and have double spring locking spark plug terminals for a secure connection. Now, more than ever, you have countless choices to achieve a great custom look with professional performance. Sumax calls it, “Performance with Color”.
These are the absolute Best Spark Plug Wires your money can buy! All wires fire intermittently no matter what coil or ignition you may have. This causes carbon build up on your plugs. ThunderVolts, with 40 ohms of resistance, have a solid stream of fire power resulting in more horsepower and more mileage. Your bike will start and run better than ever before!
40 Ohm/ft. Ferrite Spiral-Wound coated core blend of exclusive copper/nickel alloy bonded by a conductive acrylic cover. Taylor’s Ferrite Spiral-Wound core provides low resistance for optimum RFI and EMI suppression and is compatible with most Ignition Systems and electronic components. The 2 wire set has an 18" rear lead and a 22" front lead
Sumax Pro 8.2mm Motorcycle Spark Plug Wire sets
All new tooling for this model had to be done as customers complained about the Indian stock wires poor plug boot fitment. Company new Indian wires will be made with Company Thundervolt 50 core for the best performance.
Sumax has been in business for over 35 years bringing you the latest, state of the art, 100% Made in the U.S.A. Spark Plug Wires and Battery Cables. Over the years, Company have seen the transition in technology from the early metallic and carbon cores to Spiro-Pro cores. Using the Spiro-Pro core, Company achieve ten times the firepower while still offering protection for your bike’s computer and electronics. Spiro-Pro features a two-layer, 100% silicone jacket to withstand temperatures up to 600º F. Each wire is terminated to a specific length and features Taylor’s exclusive, 100% Silicone low profile PRO Comp BOOTS®. Company spark plug boots are designed with Resistors for a tight fit. They are vibration proof and have double spring locking spark plug terminals for a secure connection. Now, more than ever, you have countless choices to achieve a great custom look with professional performance. Sumax calls it, “Performance with Color”.
These are the absolute Best Spark Plug Wires your money can buy! All wires fire intermittently no matter what coil or ignition you may have. This causes carbon build up on your plugs. ThunderVolts, with 40 ohms of resistance, have a solid stream of fire power resulting in more horsepower and more mileage. Your bike will start and run better than ever before!
40 Ohm/ft. Ferrite Spiral-Wound coated core blend of exclusive copper/nickel alloy bonded by a conductive acrylic cover. Taylor’s Ferrite Spiral-Wound core provides low resistance for optimum RFI and EMI suppression and is compatible with most Ignition Systems and electronic components.
SPIRO-PRO OUTPERFORMS THE COMPETITION IN BOTH LOOKS AND PERFORMANCE!
Sumax 8mm Spark Plug Wire sets come in a variety of colors. Company Universal Spark Plug Wires are designed for any year and model motorcycle. You can use these wires with electronic or points ignitions. As a result Company Spiro Pro wires are compatible with all Harley Davidson® ignitions. If you have an aftermarket ignition, please check with manufacturer’s ohm requirement. For very high ohm ratings you can use Company Carbon Core plug wire sets. For magnetos and points you can use Company Metallic Core wire sets.
All Universal Spark Plug Wire sets include: (2) leads with molded on Spark Plug boots & loose 180 degree Evo Style coil boots & terms so you can cut & terminate to your required length.
Spiro-Pro 8mm Wire is the top choice of racers and enthusiasts due to its affordable value and overall high performance features. Spiro-Pro’s two-layer 100% silicone inner core & outer jacket keeps the wires flexible for the life of your vehicle maintaining its vibrant color with heat protection to 600º F. Taylor Cable’s Spiro-Pro wire consists of a high conductive spiral wound core with a Stainless Steel wire and covered with a fluorocarbon conductive material. Spiro-Pro features 350 ohms per foot resistance which provides more fire power to the spark plugs than OEM resistor core wires and has up to 10 times less resistance than standard resistor core wires. Spiro-Pro eliminates radio frequency interference (RFI) and is recommended when using a multi spark discharge, electronic ignition systems and other electronic components. Features Taylor Cable’s EXCLUSIVE low profile 100% silicone PROBOOTS® with vibration proof Stainless Steel double spring locking spark plug terminals. Choice of 11 vibrant colors in Universal Wire Sets; Black, Blue, Red, Purple, Yellow, Hot Orange, Hot Lime, Hot Pink, Teal, White and Gray.
SUMAX-TAYLOR CARBON CORE 8MM MOTORCYCLE SPARK PLUG WIRES OUTPERFORM THE COMPETITION IN BOTH LOOKS AND PERFORMANCE!
Company Pro 8mm Carbon Core Universal Motorcycle Spark Plug Wire sets include 2 leads with molded on plug boots & loose 180 degree Evo style coil boots & terms so you can cut and terminate to your required length. Leads are 24" lengths.
Carbon rating as follows: 1000+ ohms/ft. Please use with electronic ignitions requiring high ohm rating.
Two layer 100% silicone inner core & outer jacket keeps the wires flexible for the life of your motorcycle. As well as maintaining its vibrant color with heat protection to 600º F. Carbon Core eliminates radio frequency interference (RFI) and is recommended when using a multi spark discharge, electronic ignition systems and other electronic components. Features Taylor Cable’s EXCLUSIVE low profile 100% silicone PROBOOTS® with vibration proof Stainless Steel double spring locking spark plug terminals. Choice of 2 colors in Universal Motorcycle Wire Sets: Black and Red. Turn your motorbike into a high performance beast! Highest quality guaranteed
SUMAX-TAYLOR METALLIC MOTORCYCLE SPARK PLUG WIRES OUTPERFORM THE COMPETITION IN BOTH LOOKS AND PERFORMANCE!
All Universal motorcycle spark plug wire sets include: two leads with molded on plug boots together with loose 180 degree Evo style coil boots and terms so you can cut and terminate to your required length. Leads are 24" in length.
Taylor’s PRO SPARK PLUG WIRES beat the competition, both in looks and performance!
Company metallic motorcycle spark plug wires are used on points and magneto ignitions only. Do not use with electronic ignitions. Made with two layers of 100% silicone insulation, along with fiberglass reinforced jacket. This plug wire is designed to withstand temperatures up to 600º Fahrenheit. Taylor-Sumax collaboration guarantees unparalleled durability. This means extended wire life as well as lower motorcycle maintenance cost! Also includes Taylor’s exclusive low profile silicone PRO BOOTS® together with vibration proof stainless steel double spring locking spark plug terminals. Furthermore, Pro 8mm Metallic, Universal Spark Plug Wires are available with a single type of wire conductor known as TWC, or Tinned Copper Weld. TWC is used for racing applications where RFI is not a concern and is an excellent choice for magnetos and point style ignition applications. Choose between 4 exciting colors: Black, Red, Yellow and Blue.
SUMAX-TAYLOR SPIRO-PRO SPARK PLUG WIRES OUTPERFORM THE COMPETITION IN BOTH LOOKS AND PERFORMANCE!
All 8mm Pro Comp Universal Motorcycle Spark Plug Wire Kits include: (2) 36" leads w/ molded on plug boots & loose 180 degree Evo style coil boots and terms. Even more, you can cut and terminate to your required length. Company long Hemi style Spark Plug Boots are designed for water cooled motors.
Sumax Universal Spark Plug Wire Sets will easily fit any year and model motorcycle. Likewise, you can use these wires with electronic or points ignitions.
Spiro-Pro 8mm Plug Wire is the top choice of racers and enthusiasts due to its affordable value and overall high performance features. Furthermore, two-layer 100% silicone inner core and outer jacket keeps the wires flexible for the life of your motorbike, while maintaining it’s vibrant color with heat protection to 600º F. Taylor Cable’s Spiro-Pro wire consists of a high conductive spiral wound core with a Stainless Steel plug wire, which is covered with a fluorocarbon conductive material. Pro Comp Universal Motorcycle Spark Plug Wire features 350 ohms per foot resistance. Hence, it provides more fire power to the spark plugs than OEM resistor core wires. It also offers up to 10 times less resistance than standard resistor core wires. These plug wires eliminate radio frequency interference (RFI). Therefore are recommended for use along with a multi spark discharge, electronic ignition systems and other electronic components. Another noteworthy feature is Taylor Cable’s EXCLUSIVE low profile 100% silicone PRO COMP BOOTS® with vibration proof Stainless Steel double spring locking spark plug terminals. Choice of 11 vibrant colors in Universal Plug Wire Sets; Black, Blue, Red, Purple, Yellow, Hot Orange, Hot Lime, Hot Pink, Teal, White and Gray.
StreeThunder 8mm Motorcycle Spark Plug Wire Sets
This, extremely durable 8mm spark plug wire made of Black Silicone and Synthetic Jacketing resists heat, oil, and abrasion. Furthermore, 500 ohm per foot resistance delivers greater spark energy, while improving power, idle, and fuel efficiency. Likewise, StreeThunder plug wires feature Kevlar Helically Spiral Wound Core conductor, which results in greater strength and durability that suppresses Electro Magnetic (EMI) and Radio Frequency Interference (RFI).
Sumax and Taylor Cable developed the STREETHUNDER Wire to deliver great performance at an extremely affordable price that features a low resistance conductor.
Another great treat is the matching black silicone boot which protects your spark plug wires against high exhaust temperatures. The conductor is wrapped in durable silicone, double layer jacketing for exceptional heat protection, strength as well as durability. Above all, Double Spring Locking Terminals allow for secure, vibration proof connections.
8MM StreeThunder Spark Plug Wires fit Harley Davidson® Dyna FX, Dyna FXR, Softail, Sportster and Touring Bikes.
Availability: Usually ships the next business day 100% Made in USA
8MM Stainless Steel Spark Plug Wires complete with grounding straps, come ready to plug in. These are great looking, black motorcycle plug wires with stainless braid cover.
The core of braided stainless steel spark plug wire is rated at 350 ohms/foot. Furthermore, these wires can be used with electronic or points ignitions. Also, compatible with all Harley Davidson® ignitions. If you have an aftermarket ignition, please check with manufacturer’s ohm requirement.
Stainless Steel Spark Plug Wire adds a touch of style to your motorcycle! The SST features an 8mm spiral wound conductor for maximum fire power without electromagnetic interference, and Taylor’s 8mm two layer silicone jacketed wire for heat protection up to 550° Fahrenheit. Furthermore, stainless steel motorcycle spark plug wires feature matching blue silicone spark plug boots with stainless steel double spring locking plug terminals. Stainless Steal Plug Wire requires the use and installation of Grounding Kit included with wire set. 100% Made in USA
Vintage Classic Thunder – Old School Looks with Modern Technology
7mm Black Silicone Sumax Vintage Braided Cloth Spark Plug Wires for Harley Davidson® motorcycles with Synthetic Jacketing resists heat, oil, and abrasion. Furthermore, combination of Kevlar Helically Spiral Wound Core at 350 ohm per foot resistance delivers greater spark energy, while improving power, idle, and fuel efficiency. In addition, matching Black Silicone Boots protects against high exhaust temperatures. Double Spring Locking Terminals for secure, vibration proof connections. Finally, the cloth jacket is rated at 450° F. These wires will work on all Harley Davidsons® with point or electronic ignitions. Custom fit and universal sets available. Universal motorcycle spark plug wire sets come with black plug boots or rajah terminals. Colors to choose from: Orange with Black Tracer, Yellow with Black & Red Tracer, Black with Blue Tracer, Red with Black Tracer, as well as Gray with Brown Tracer. Performance with COLOR.
Check out what Baggers Magazine says about Company Vintage Cloth Spark Plug Wires! 100% Made in USA
Vintage Classic Thunder – Old School Looks with Modern Technology
Due to a combination of Kevlar Helically Spiral Wound Core at 350 ohm per foot resistance Company cloth plug wire delivers a much greater spark energy, while improving power, idle, and fuel efficiency. Furthermore, Matching Black Silicone Boots, together with Synthetic Jacketing protect against high exhaust temperatures, oil and abrasion. Double Spring Locking Terminals allow for secure, vibration proof connections. Also, Cloth Jacket is rated at 450° F. Most noteworthy, these wires will work on all Harley Davidson® with point or electronic ignitions. Custom fit and universal sets are also available. Universal cloth motorcycle spark plug wires sets come with black plug boots or rajah terminals. Colors to choose from are: Orange with Black Tracer, Yellow with Black & Red Tracer, Black with Blue Tracer, Red with Black Tracer, and Gray with Brown Tracer.
Make a statement with Company FAT “409” Pro Race Motorcycle Spark Plug Wires
Taylor’s “409” spark plug wires are 10.4mm in diameter! These are high performance ignition wires, available for street or track applications. Furthermore, 409 motorcycle ignition wires provide continuous heat protection up to 600-degrees Fahrenheit and 102 000 volts dielectric strength. Recommended for extreme temperatures and motorcycle racing.
Best high performance spark plug wire you can buy!
409 Pro Race Custom Fit Motorcycle Spark Plug Wires features a Spiral-Wound core with 350 ohms per foot resistance for EMI and RFI suppression delivering maximum fire power without radio interference. Recommended for use with multiple spark discharge and electronic ignition systems. Available in three color choices, Black, Red, and Blue, with color coordinated low profile 100% silicone PRO BOOTS® as well as vibration proof double spring locking spark plug terminals. If you enjoy street race, drag race or ride at the race track, this is the spark plug wire for you!
9 MM Firepower with Killer Looks
All wires fire intermittently no matter what coil or ignition you may have. That is why you see carbon on your plugs. Company 9MM Firepower wires with 40 ohms of resistance provide a solid stream of fire power eliminating the carbon on your plugs. This results in more horsepower, more torque and better mileage. Your bike will start and run better than ever before! They are compatible with all Harley Davidson® ignition systems. You have a choice of Custom Fit Sets for your Harley Davidson® model or Universal Sets where you terminate to your desired length. THE ULTIMATE PERFORMANCE AND RACING IGNITION WIRE AVAILABLE! Sumax Taylor Cable’s lowest resistance wire – 9mm diameter and only 40-OHMS per foot = more horse power… torque… spark energy.
40 Ohm/ft Ferrite Spiral-Wound coated core blend of exclusive copper/nickel alloy bonded by a conductive acrylic cover. Exclusive 100% ZIMPLEX® silicone outer jacket provides additional heat and abrasion protection up to 600 degrees Fahrenheit and 102,000 volts dielectric strength, a must for the extreme conditions of open wheel racing and under hood temperatures. Available in Black with Silver lettering with color coordinated low profile 100% silicone PROBOOTS® featuring vibration proof double spring locking spark plug terminals. The Universal Fit sets and will require cutting to fit, terminating, and booting the coil boot end. Universal Fit sets are universal for most motorcycles.
Available in Pro 8mm and ThunderVolt 8.2mm Custom Kits
* PLEASE NOTE, THE LENGTHS OF THESE WIRES WERE CHANGED BY HARLEY 6 MONTHS AFTER THE RELEASE OF THIS MODEL. SHOULD YOU HAVE AN EARLY SET WITH THE INCORRECT LENGTHS, Company WILL REPLACE THEM FOR YOU* Pro 8mm Custom Kits
Spiro-Pro 8mm Wire is the top choice of racers and enthusiasts due to its affordable value and overall high performance features. Spiro-Pro’s two-layer 100% silicone inner core & outer jacket keeps the wires flexible for the life of your vehicle maintaining its vibrant color with heat protection to 600º F. Taylor Cable’s Spiro-Pro wire consists of a high conductive spiral wound core with a Stainless Steel wire and covered with a fluorocarbon conductive material. Spiro-Pro features 350 ohms per foot resistance which provides more fire power to the spark plugs than OEM resistor core wires and has up to 10 times less resistance than standard resistor core wires. Spiro-Pro eliminates radio frequency interference (RFI) and is recommended when using a multi spark discharge, electronic ignition systems and other electronic components. Features Taylor Cable’s EXCLUSIVE low profile 100% silicone PROBOOTS® with vibration proof Stainless Steel double spring locking spark plug terminals. Choice of 11 vibrant colors in Universal Wire Sets; Black, Blue, Red, Purple, Yellow, Hot Orange, Hot Lime, Hot Pink, Teal, White and Gray.
ThunderVolt 8.2mm Custom Kits These are the absolute Best Spark Plug Wires your money can buy!
All wires fire intermittently no matter what coil or ignition you may have. That is why you see carbon on your plugs. ThunderVolts with 40 ohms of resistance, have a solid stream of fire power resulting in more horsepower and more mileage. Your bike will start and run better than ever before! They are compatible with Harley ignition systems.
Spiro-Pro 8mm Wire is the top choice of racers and enthusiasts due to its affordable value and overall high performance features. Spiro-Pro’s two-layer 100% silicone inner core & outer jacket keeps the wires flexible for the life of your vehicle maintaining its vibrant color with heat protection to 600º F. Taylor Cable’s Spiro-Pro wire consists of a high conductive spiral wound core with a Stainless Steel wire and covered with a fluorocarbon conductive material. Spiro-Pro features 350 ohms per foot resistance which provides more fire power to the spark plugs than OEM resistor core wires and has up to 10 times less resistance than standard resistor core wires. Spiro-Pro eliminates radio frequency interference (RFI) and is recommended when using a multi spark discharge, electronic ignition systems and other electronic components. Features Taylor Cable’s EXCLUSIVE low profile 100% silicone PROBOOTS® with vibration proof Stainless Steel double spring locking spark plug terminals. Choice of 6 vibrant colors in Universal Wire Sets: Black, Blue, Red, Purple, Yellow, Orange.
THE BEST…ThunderVolt 8.2MM 40 OHM/ft SPARK PLUG WIRES!
These are the absolute Best Spark Plug Wires your money can buy! All wires fire intermittently no matter what coil or ignition you may have. That is why you see carbon on your plugs. ThunderVolt with 40 ohms of resistance, have a solid stream of fire power resulting in more horsepower and more mileage. Your bike will start and run better than ever before! They are compatible with Harley ignition systems.
40 Ohm/ft. Ferrite Spiral-Wound coated core blend of exclusive copper/nickel alloy bonded by a conductive acrylic cover. Taylor’s Ferrite Sprial-Wound core provides low resistance for optimum RFI and EMI suppression and is compatible with most Ignition Systems and electronic components. 100% Zimplex Silicone 2-layer Outer Jacket for added Heat Protection up to 600º F, extending wire life and performance. DYNO Tested to outperform the competition in Spark Energy, Horsepower Increases and Significant Torque Gains. Smoother Idle and Improved Fuel Economy. Custom-Fit Sets available in Black, Red, Yellow, Orange, Purple and Blue colors. 600º Silicone Plug Boots featuring vibration proof double spring locking terminals.
SPIRO-PRO OUT PERFORMS THE COMPETITION IN BOTH LOOKS AND PERFORMANCE!
Sumax 8mm Spark Plug Wire sets come in a variety of colors. Company Custom Set Wires are designed for your specific year and model Harley Davidson® motorcycle. You can use these wires with electronic or points ignitions. As a result Company Spiro Pro wires are compatible with all Harley Davidson® ignitions. If you have an aftermarket ignition, please check with manufacturer’s ohm requirement. For very high ohm ratings you can use Company Carbon Core wire sets. For magnetos and points you can use Company wire (metallic) core wire sets.
Spiro-Pro 8mm Wire is the top choice of racers and enthusiasts due to its affordable value and overall high performance features. Spiro-Pro’s two-layer 100% silicone inner core & outer jacket keeps the wires flexible for the life of your vehicle maintaining its vibrant color with heat protection to 600º F. Taylor Cable’s Spiro-Pro wire consists of a high conductive spiral wound core with a Stainless Steel wire and covered with a fluorocarbon conductive material. Spiro-Pro features 350 ohms per foot resistance which provides more fire power to the spark plugs than OEM resistor core wires and has up to 10 times less resistance than standard resistor core wires. Spiro-Pro eliminates radio frequency interference (RFI) and is recommended when using a multi spark discharge, electronic ignition systems and other electronic components. Features Taylor Cable’s EXCLUSIVE low profile 100% silicone PROBOOTS® with vibration proof Stainless Steel double spring locking spark plug terminals. Choice of 11 vibrant colors in Universal Wire Sets; Black, Blue, Red, Purple, Yellow, Hot Orange, Hot Lime, Hot Pink, Teal, White and Gray.
ThunderVolt 10.4mm High Performance Custom Spark Plug Wires
All Spark Plug Wires will fire intermittently no matter what coil or ignition you may have. That is why you see carbon on your plugs. ThunderVolts with 40 ohms of resistance, have a solid stream of fire power resulting in more horsepower and more mileage. Your bike will start and run better than ever before! They are compatible with Harley Davidson® ignition systems.These are the absolute Best Spark Plug Wires your money can buy!
THE ULTIMATE PERFORMANCE AND RACING IGNITION WIRE AVAILABLE TODAY!
THUNDERVOLT®50 is the ABSOLUTE best .409 inch, 10.4mm diameter high tech, high performance ignition wire available. Carl’s Speed Shop DYNO-Tested and Track Proven, achieving 5 HP and 7 lbs. torque better than the competition. 40 Ohm/ft Ferrite Spiral-Wound coated core blend of exclusive copper/nickel alloy bonded by a conductive acrylic cover. SumaX Ferrite Spiral-Wound low resistance core provides optimum RFI and EMI suppression and is compatible with use on most electronic ignition systems and components. Features a tightly woven heat treated fiberglass braid eliminating the need for additional sleeving. Exclusive three layer 100% ZIMPLEX® silicone outer jacket provides additional heat and abrasion protection up to 600 degrees Fahrenheit and 102,000 volts dielectric strength, a must for the extreme conditions of open wheel racing and under hood temperatures. Available in Black with Gold lettering with color coordinated low profile 100% silicone PROBOOTS® featuring vibration proof double spring locking spark plug terminals.
Sumax Taylor Cable’s biggest and lowest resistance wire – 10.4mm diameter and only 40-OHMS per foot = more horse power… torque… spark energy.
THE ULTIMATE PERFORMANCE AND RACING IGNITION WIRE AVAILABLE TODAY!
All wires fire intermittently no matter what coil or ignition you may have. That is why you see carbon on your plugs. ThunderVolts with 40 ohms of resistance, have a solid stream of fire power resulting in more horsepower and more mileage. Your bike will start and run better than ever before! They are compatible with Harley Davidson® ignition systems.These are the absolute Best Spark Plug Wires your money can buy!
THUNDERVOLT®50 is the ABSOLUTE best .409 inch, 10.4mm diameter high tech, high performance ignition wire available. Carl’s Speed Shop DYNO-Tested and Track Proven, achieving 5 HP and 7 lbs. torque better than the competition. 40 Ohm/ft Ferrite Spiral-Wound coated core blend of exclusive copper/nickel alloy bonded by a conductive acrylic cover. Company Ferrite Spiral-Wound low resistance core provides optimum RFI and EMI suppression and is compatible with use on most electronic ignition systems and components. Features a tightly woven heat treated fiberglass braid eliminating the need for additional sleeving. Exclusive three layer 100% ZIMPLEX® silicone outer jacket provides additional heat and abrasion protection up to 600 degrees Fahrenheit and 102,000 volts dielectric strength, a must for the extreme conditions of open wheel racing and under hood temperatures. Available in Black with Gold lettering with color coordinated low profile 100% silicone PROBOOTS® featuring vibration proof double spring locking spark plug terminals. The Universal Fit sets and will require cutting to fit, terminating, and booting the coil end. Universal sets are for most motorcycles.
Sumax Taylor Cable’s biggest and lowest resistance wire – 10.4mm diameter and only 40-OHMS per foot = more horse power… torque… spark energy.
Shortie Spark Plug Wires
Shortie Spark Plug Wires for coils centered between the cylinders 4.5" w/ 90 degree plug boots & 180 degree coil boots & Evo style terminals. Comes in Black with gold lettering only. Custom Shortie Motorcycle Spark Plug Wires
Custom Shortie Motorcycle Spark Plug Wires
All wires fire intermittently no matter what coil or ignition you may have. That is why you see carbon on your plugs. ThunderVolt wires, with 40 ohms of resistance, have a solid stream of fire power resulting in more horsepower and more mileage. Your bike will start and run better than ever before! They are compatible with Harley Davidson® ignition systems.These are the absolute Best Spark Plug Wires your money can buy!
THE ULTIMATE PERFORMANCE AND RACING IGNITION WIRE AVAILABLE TODAY!
THUNDERVOLT®50 is the ABSOLUTE best .409 inch, 10.4mm diameter high tech, high performance ignition wire available. Carl’s Speed Shop DYNO-Tested and Track Proven, achieving 5 HP and 7 lbs. torque better than the competition. 40 Ohm/ft Ferrite Spiral-Wound coated core blend of exclusive copper/nickel alloy bonded by a conductive acrylic cover. Company Ferrite Spiral-Wound low resistance core provides optimum RFI and EMI suppression and is compatible with use on most electronic ignition systems and components. Features a tightly woven heat treated fiberglass braid eliminating the need for additional sleeving. Exclusive three layer 100% ZIMPLEX® silicone outer jacket provides additional heat and abrasion protection up to 600 degrees Fahrenheit and 102,000 volts dielectric strength, a must for the extreme conditions of open wheel racing and under hood temperatures. Available in Black with Gold lettering with color coordinated low profile 100% silicone PROBOOTS® featuring vibration proof double spring locking spark plug terminals.
Sumax Taylor Cable’s biggest and lowest resistance wire – 10.4mm diameter and only 40-OHMS per foot = more horse power… torque… spark energy.
PRO 7MM SPARK PLUG WIRES GIVE YOU A PUNCH OF POWER WITH A TOUCH OF CLASS!
Boots and spark plug wires are made from extra high temperature silicone, which gives protection up to 600° F. Furthermore. Company Triumph spark plug wires feature 7mm Black Silicone and Synthetic Jacketing and hence resist oil, and abrasion. Similarly, 350 ohm per foot resistance delivers greater spark energy, while improving power, idle, and fuel efficiency. A combination Kevlar Helically Spiral Wound Core conductor for greater strength and durability that suppresses Electro Magnetic (EMI) and Radio Frequency Interference (RFI). Likewise, wires are compatible with all year Triumph models. Matching Black Silicone Boots protect against high exhaust temperatures. Finally, Double Spring Locking Terminals provide a secure-vibration proof connections. Colors: Black, Red, Orange, Yellow, Blue, Purple, Green & White.
Classic Thunder Cloth Spark plug Wire– Old School Looks with Modern Technology!
Most noteworthy, Company cloth spark plug wires will work on all Harley Davidsons® with point or electronic ignitions. Custom fit and universal sets available. Universal sets available with black plug boots or rajah terminals. Colors: Orange with Black Tracer, Yellow with Black & Red Tracer, Black with Blue Tracer, Red with Black Tracer, and Gray with Brown Tracer.
CUSTOM PRO 8MM OUT PERFORMS THE COMPETITION IN BOTH LOOKS AND PERFORMANCE!
Sumax 8mm Spark Plug Wire sets come in a variety of colors. SumaX Custom Set Wires are designed for your specific year and model Victory® motorcycle. You can use these wires with electronic or points ignitions. As a result SumaX Spiro Pro wires are compatible with all Victory® ignitions. If you have an aftermarket ignition, please check with manufacturer’s ohm requirement. For very high ohm ratings you can use Company Carbon Core wire sets. For magnetos and points you can use Company wire (metallic) core wire sets.
Spiro-Pro 8mm Wire is the top choice of racers and enthusiasts due to its affordable value and overall high performance features. Spiro-Pro’s two-layer 100% silicone inner core & outer jacket keeps the wires flexible for the life of your vehicle maintaining its vibrant color with heat protection to 600º F. Taylor Cable’s Spiro-Pro wire consists of a high conductive spiral wound core with a Stainless Steel wire and covered with a fluorocarbon conductive material. Spiro-Pro features 350 ohms per foot resistance which provides more fire power to the spark plugs than OEM resistor core wires and has up to 10 times less resistance than standard resistor core wires. Spiro-Pro eliminates radio frequency interference (RFI) and is recommended when using a multi spark discharge, electronic ignition systems and other electronic components. Features Taylor Cable’s EXCLUSIVE low profile 100% silicone PRO COMP BOOTS® with vibration proof Stainless Steel double spring locking spark plug terminals. Choice of 11 vibrant colors in Universal Wire Sets; Black, Blue, Red, Purple, Yellow, Hot Orange, Hot Lime, Hot Pink, Teal, White and Gray.
THE BEST 8.2MM 40 OHM/ft SPARK PLUG WIRES!
These are the absolute Best Spark Plug Wires your money can buy! All wires fire intermittently no matter what coil or ignition you may have. That is why you see carbon on your plugs. ThunderVolts with 40 ohms of resistance, have a solid stream of fire power resulting in more horsepower and more mileage. Your bike will start and run better than ever before! They are compatible with Victory® ignition systems.
40 Ohm/ft. Ferrite Spiral-Wound coated core blend of exclusive copper/nickel alloy bonded by a conductive acrylic cover. Taylor’s Ferrite Sprial-Wound core provides low resistance for optimum RFI and EMI suppression and is compatible with most Ignition Systems and electronic components. 100% Zimplex Silicone 2-layer Outer Jacket for added Heat Protection up to 600º F, extending wire life and performance. DYNO Tested to outperform the competition in Spark Energy, Horsepower Increases and Significant Torque Gains. Smoother Idle and Improved Fuel Economy. Custom-Fit Sets available in Black, Red, Yellow, Orange, Purple and Blue colors. 600º Silicone PRO COMP PLUG BOOTS feature vibration proof double spring locking terminals.
ThunderVolt 10.4mm High Performance Custom Spark Plug Wires
All wires fire intermittently no matter what coil or ignition you may have. That is why you see carbon on your plugs. ThunderVolts with 40 ohms of resistance have a solid stream of fire power resulting in more horsepower and more mileage. Your bike will start and run better than ever before! Thundervolt 10.4 motorbike spark plug wires are compatible with Victory® ignition systems. These are the absolute Best Spark Plug Wires your money can buy!
THE ULTIMATE PERFORMANCE AND RACING IGNITION WIRE FOR YOUR VICTORY MOTORCYCLE AVAILABLE TODAY!
THUNDERVOLT® 50 is the ABSOLUTE best plug wire available, at 409 inch, 10.4mm diameter guarantees both high tech and high performance. Carl’s Speed Shop DYNO-Tested and Track Proven, achieving 5 HP and 7 lbs. torque better than the competition. 40 Ohm/ft Ferrite Spiral-Wound coated core blend of exclusive copper/nickel alloy bonded by a conductive acrylic cover. Company Ferrite Spiral-Wound low resistance core provides optimum RFI and EMI suppression and is compatible with use on most electronic ignition systems and components. Features a tightly woven heat treated fiberglass braid eliminating the need for additional sleeving. Exclusive three layer 100% ZIMPLEX® silicone outer jacket provides additional heat and abrasion protection up to 600 degrees Fahrenheit and 102 000 volts dielectric strength, a must for the extreme conditions of open wheel racing and under hood temperatures. Available in Black with Gold lettering with color coordinated low profile 100% silicone PRO COMP BOOTS® featuring vibration proof double spring locking spark plug terminals.
Sumax Pro 8mm Motorcycle Spark Plug Wire sets
All new tooling for this model had to be done as customers complained about the Indian stock wires poor plug boot fitment. SumaX new Indian wires will be made with Thundervolt 50 core for the best performance.
Sumax has been in business for over 35 years bringing you the latest, state of the art, 100% Made in the U.S.A. Spark Plug Wires and Battery Cables. Over the years, we have seen the transition in technology from the early metallic and carbon cores to Spiro-Pro cores. Using the Spiro-Pro core, we achieve ten times the firepower while still offering protection for your bike’s computer and electronics. Spiro-Pro features a two-layer, 100% silicone jacket to withstand temperatures up to 600º F. Each wire is terminated to a specific length and features Taylor’s exclusive, 100% Silicone low profile PRO Comp BOOTS®. SumaX spark plug boots are designed with Resistors for a tight fit. They are vibration proof and have double spring locking spark plug terminals for a secure connection. Now, more than ever, you have countless choices to achieve a great custom look with professional performance. Sumax calls it, “Performance with Color”.
Spiro-Pro’s two-layer 100% silicone inner core & outer jacket keeps the wires flexible for the life of your motorcycle maintaining its vibrant color with heat protection to 600º F.
Taylor Cable’s Spiro-Pro spark plug wire consists of a high conductive spiral wound core with a Stainless Steel wire and covered with a fluorocarbon conductive material. These spark plug wires feature 350 ohms per foot resistance which provides more fire power to the spark plugs than OEM resistor core wires and has up to 10 times less resistance than standard resistor core wires.
Extreme Duty Battery Cables deliver the “Punch of Power”! “An EXCELLENT Replacement for stock OEM”!
Sumax Extreme Duty Battery Cables by Taylor are the ULTIMATE High Performance Battery Cable that customers can buy! Sumax Extreme cables have a unique all black design featuring 2 gauge cables rated at 180 amp rated. These very fat but flexible cables will transfer more cranking power with less voltage drop as compared to any other cable on the market today. The cables have over 2000 bare strands of copper wire covered with vinyl insulation that is topped by a synthetic thermo rubber jacket that resists heat while allowing maximum flexibility. Terminals are closed-barrel style made of tinned copper with 1/4” & 5/16” eyelets. Sealed insulated black heat shrink-tubing means no moisture will ever get in these cables if properly installed. Company cables are available in kit form for your Harley Davidson® motorcycle making your purchase easy and fast.
Sumax Taylor Made Xtra Heavy Duty Battery Cables for all 2008 & newer Victory® Models
Sumax Xtra Heavy Duty Victory® Battery Cables by Taylor are the ULTIMATE High Performance Battery Cable that customers can buy! Sumax Xtra Heavy Duty cables have a unique all black design featuring 2 gauge cables rated at 180 amp. These very fat but flexible cables will transfer more cranking power with less voltage drop as compared to any other cable on the market today. The cables feature 420 x 30 stranding copper wire covered with vinyl insulation that is topped by a synthetic thermo rubber jacket that resists heat while allowing maximum flexibility. Terminals are closed-barrel style made of tinned copper. Sealed insulated black heat shrink-tubing means no moisture will ever get in these cables if properly installed. Company cables are available in kit form for your Victory® motorcycle making your purchase easy and fast.
Sumax Extreme Duty Battery Cables by Taylor are the ULTIMATE High Performance Battery Cable that customers can buy! Sumax Extreme cables have a unique all black design featuring 2 gauge cables rated at 180 amp rated. These very fat but flexible cables will transfer more cranking power with less voltage drop as compared to any other cable on the market today. The cables have over 2000 bare strands of copper wire covered with vinyl insulation that is topped by a synthetic thermo rubber jacket that resists heat while allowing maximum flexibility. Terminals are closed-barrel style made of tinned copper with 1/4” and 5/16” eyelets for Harley Davidson® applications. Universal applications have 1/4" eyelets on both ends. Harley Davidson Battery Cables
Harley Davidson Battery Cables
Sealed insulated black heat shrink-tubing means no moisture will ever get in these cables if properly installed. Company cables are available in kit form for your Harley Davidson® motorcycle making your purchase easy and fast.
When you need a high quality OEM replacement, use Company 8 gauge battery cables!
These Phantom saddle bag brackets fit 1993-2008 Harley Davidson Touring Models® Road King, Road Glide, Electra Glide & Street Glide. These brackets give a floating effect to your saddle bags by eliminating the rear crash bar in front of the bags. This will ultimately give your bike the clean look of the newer Touring models. Unlike stock or other aftermarket brackets, these 100% Made In the USA stainless steel brackets have slotted holes to mount and keep your bags level. They come powder coated in SUMAX gloss black, complete with stainless hardware and rubber bumpers for easy installation. Company recommend that you use Company horizontal support bracket 8810 to replace your stock brace for a cleaner look! Works great with longer custom fenders as it will hide under the fender.
Note: Due to increased shipping costs Company no longer sell these overseas. For SumaX customers in Europe, you can buy these through SUMAX authorized dealer Zodiac, or in Asia through Parts Max!
Horizontal Support Brackets and Dzus Fastener Kits for Saddle Bags
Company unique 1 piece design makes installation easy! All brackets include mounting hardware and DZUS receptacles which accept 1/4 turn Dzus fasteners. These are exactly like the fasteners used on stock Harley Touring models. All brackets are finished in Sumax High Gloss Black powder coat. Adjustable Saddle Bag Bracket
Adjustable Saddle Bag Bracket Hanging Kit, includes (4) L shaped brackets with Dzus receptacles, stainless steel mounting hardware and rubber bumpers. Horizontal Support Bracket
New Support Bracket braces your saddle bag brackets side to side. These 100% made in the USA cold rolled steel brackets are finished in Sumax High Gloss Black powder coat. Comes complete with stainless steel hardware for easy installation. This may be used with your 1993 – 2008 stock Harley Davidson Saddle Bag Brackets or with Company 8758 Phantom Brackets.
Saddle Bag Brackets installation instructions Adjustable Horizontal Support Bracket
Company Sumax Cross Brace is specifically designed to work with Company Sumax Saddle Bag Brackets, and is designed to reduce vibrations and add more rigidity. They are made from 3/16" Laser Cut Steel, finished in Sumax High Gloss Black powder coat and are adjustable to work with all of Company Saddle Bag Brackets. Dzus
Dzus Fastener Kit includes (4 each) Washers, Dzus Pins and Rubber Grommets for all year Harley Davidson Hard Bags.
SUMAX’S extensive range of hard bag options has now expanded with the introduction of brackets for FXR models 1991 and newer. Due to new shock location, please double check your measurement prior to placing an order. (Fender rail hole to shock bolt measures 11 5/8") Detachables work with Company brackets as Company Flange works as a washer
Detachables work with Company brackets as Company Flange works as a washer
The brackets are powder coated black by Sumax and feature 1/4-turn quick disconnects with Dzus fasteners like those found on all H-D Touring models. These connectors allow the brackets to be used with either H-D hard or soft bags. Solid Mount Sissy Bars, Detachables and Luggage Racks will also work with Company Brackets.
SUMAX’S extensive range of hard bag options has now expanded with the introduction of brackets for 2000 and Up Sportster and XL models. The brackets are finished in Sumax high gloss black powder coat and feature 1/4-turn quick disconnects with Dzus fasteners like those found on all H-D Touring models. These connectors allow the brackets to be used with either H-D hard or soft bags from 1993 and newer. You will have to relocate factory turn signals on all models. Nightster® model will have to relocate side mount license plate. Solid Mount Sissy Bars, Detachables and Luggage Racks will also work with Company Brackets. Detachables work with Company brackets as Company Flange works as a washer
Detachables work with Company brackets as Company Flange works as a washer
For additional support, Company Part # 8810A is included at no charge. Running the bags without the use of this bracket voids the warranty.
Softail Brackets accept Harley Davidson® Saddle bags 1993+
SUMAX’S extensive range of hard bag options has now expanded with the introduction of brackets for Harley Davidson® Softail models. The brackets are finished in Sumax high gloss black powder coat and feature 1/4-turn quick disconnects with Dzus fasteners like those found on all H-D Touring models. These connectors allow the brackets to be used with either H-D hard or soft bags from 1993 and newer. Detachables work with Company brackets as Company Flange works as a washer
Detachables work with Company brackets as Company Flange works as a washer
Solid Mount Sissy Bars, Detachables, Luggage Racks and Passenger Boards will work with Company brackets. However, if you have Rear Crash Bars on your Softail, Company brackets will not work. Company have found Softail Slim model’s fender rails are too short. To install brackets, you must add the standard Softail fender rail cover. (Breakout model will require special fabrication of mounting system on your end and a widened rear fender). Turn signals located on fender or rails must be relocated for bag clearance. (Deluxe models need not to relocate.) The distance from fender rail bolts to bottom of bag is 13.5" which is needed for clearance. Also, keep in mind wide seats may hinder opening of lids. If your exhausts are at the axle or below, you should have clearance. If your bike is lowered where the rear axle/nut is above the system, axle/nut you may contact & damage your bag. For additional support, Company Part # 8810A is included at no charge. Running the bags without the use of this bracket voids the warranty.
SUMAX’S extensive range of hard bag options has now expanded with the introduction of brackets for ALL Dyna models. The brackets are powder coated black by Sumax and feature 1/4-turn quick disconnects with Dzus fasteners like those found on all H-D Touring models. These connectors allow the brackets to be used with either H-D hard or soft bags, 1993 and newer. Solid Mount Sissy Bars and Luggage Racks will also work with Company Brackets. To mount Company brackets using detachables, please select Company part #8814, 15 or 17 ending in “D”. DynaD Brackets will accept detachables
DynaD Brackets will accept detachables
Distance from fender rail bolts to bottom of the bag is 13.5" which is needed for clearance. The brackets mount just to the rear of the shocks for passenger comfort. (If the bags were more forward the passengers legs would hit the bags trying to find the pegs.) Company mounting system will work with the Switchback model.