Product Details
Rumble MX Strokes Off-Road Helmet by Suomy®. The Rumble delivers legendary Suomy style and performance at a fantastic price. Designed with a more compliant fit and exceptional comfort, this helmet provides the full Suomy experience to recreational off-road riders while meeting the demands and requirements of racing.
Specifications
| Helmet Shape: Intermediate Oval |
| Style: Graphic |
| Bluetooth: No |
| Face Shield: No |
| Integrated Sun Visor: No |
| Peak Visor: Yes |
| Pinlock Ready: No |
| Helmet Certification: DOT Approved and ECE Approved |
Includes
- Rumble MX Off-Road Helmet
Features
- Lightweight Polycarbonate Shell
- DVRC Channeled EPS Liner for maximum air flow with minimal weight
- Removable/Washable liner and cheek pads allows custom fit
- Functional intake and exhaust venting keeps the rider cool
- Meets or exceeds ECE and DOT standards
- Race approved by every major U.S. race organization
- Made with upgrading technologies to ensure high security
- Will deliver the ultimate in safety and light weight
- Comes with everything needed for exasperated use on the track
- Manufactured utilizing advanced testing equipment
- Designed to offer a perfect combination of protection and comfort
Benefits:
- SHELL in reinforced thermoplastic resin, moulded by injection. Internal polystyrene in two sizes (M and L).
- INTERNAL POLYSTYRENE protective lining, available in two sizes (M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
- The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw.
To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility.
After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs.
Suomy® was born in Italy in 1997, as a line of racing helmets by will of Umberto Monti. The activity of the Italian company is tied closely to the racing world where it gains valuable insight and information for the development and creation of helmets.