Magnum FLOW Inverted Replacement Air Filter (IRF) w/ Pro GUARD 7 Media

Description

Constructed with 100% polyurethane on top and bottom, this high-flow, oiled OE replacement performance filter will outflow the stock paper filter by up to 15% for improved horsepower and torque. The Pro-GUARD 7 air filter uses five layers of progressively finer mesh cotton with two layers of synthetic gauze media to provide maximum protection with the highest cumulative filtration efficiency for severe duty environments. Washable and reusable for multiple cleaning cycles, the tall, open, evenly spaced pleats provide excellent dust holding capacity for a longer service cycle between cleanings. An integrated urethane bump seal ensures tight, no leak seal over the life of the filter. This filter features a 7-layer progressive, oiled media to provide maximum flow with excellent filtration. The progressive layering of filter media allows the filter to flow at high levels even when dirty. The patented Pro-GUARD 7 performance air filter features 5-layers of progressive cotton gauze and 2-layers of synthetic media and is constructed with 100% polyurethane for long life and multiple cleaning cycles. The Pro-GUARD 7 filter media has been tested at a 99.7% efficiency rating. aFe performance air filters use a rounded 35 mm pleat design which produces more useable filter surface area for increased flow and greater dust holding capacity. This pliable sealing surface conforms to even the most uneven filter housing. This design eliminates the use of gaskets or sealants. The soft urethane construction always goes back to its original form so you will never compress the bump seal. This makes for a perfect filter fit and sealing surface every time. aFe Power performance air filters are constructed using full 360 degree urethane frames. This construction allows for a proper OE style fit with excellent filter strength.

aFe POWER designs, manufactures, and delivers innovative performance products for hundreds of vehicle applications worldwide. Through extensive R&D and use of the latest technology, aFe POWER products are engineered to the highest standard and tailor fit to your vehicle’s unique specifications. With intakes, exhaust, suspension, electronics, and more, aFe POWER has what you need to get every bit of performance out of your vehicle.

Fitment

This part fits the following vehicles.

Features & benefits

• Five layers of progressively finer mesh cotton gauze media and two layers of synthetic media
• Oiled OE replacement high performance filter will outflow stock paper filter
• Constructed with 100% polyurethane on top and bottom
• Integrated urethane bump seal ensures a no leak seal
• Washable and reusable for multiple cleaning cycles

Specifications

Magnuson-Moss Warranty Act

Legally, a vehicle manufacturer cannot void the warranty on a vehicle due to an aftermarket part unless they can prove that the aftermarket part caused or contributed to the failure in the vehicle (per the Magnuson Moss Warranty Act (15 U.S.C. 2302(C)).

California residents

WARNING: This product can expose you to chemicals including nickel, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.