Sprint Booster Throttle Enhancer Power Converter

Description

For vehicles with electronic control (ETC) systems, or drive by wire, this device plugs into the OE connector located behind the accelerator pedal. It's a simple installation, requiring no cutting of any wires or interference of the automobile's electronics. It does not affect other systems such as electronic injection, ABS, etc. The three main acceleration modes can be switched by pressing the main button. When the LED is off, the Sprint Booster is deactivated, and the car has factory settings. In Sport Mode, the LED is green, and throttle response is improved by up to 30%. With the red colored LED, the Sprint Booster is in Race Mode, and it improves response by up to 60%. Each acceleration mode comes with nine programs. Select 1-9 in SPORT mode and 1-9 in RACE mode, with '1' being the least aggressive program and '9' the most aggressive. The acceleration programs can be changed using the two arrow buttons on the top of the device.  By selecting the desired acceleration program in each mode, the driver can fine-tune each mode per their driving style (e.g. select SPORT 9 & RACE 5). Valet mode limits the acceleration of the vehicle by 55%, 65%, or 75% (comes in three selectable levels). It is activated and deactivated with a three-digit PIN. By limiting the acceleration, there will be a significant reduction in the vehicle's performance. The Pedal Lock mode provides extra protection against unauthorized vehicle use. The driver can deactivate the acceleration ability of the vehicle through a 3 digit PIN. The menu for Valet and Pedal Lock mode is accessed when the vehicle is stationary and the Sprint Booster is off, by pressing the two arrow buttons simultaneously. In addition to increased throttle response for effortless downshifts and safer overtaking, there is also a noticeable improvement to the transmission’s shifts (on vehicle’s equipped with automatic transmissions).

aFe POWER designs, manufactures, and delivers innovative performance products for hundreds of vehicle applications worldwide. Through extensive R&D and use of the latest technology, aFe POWER products are engineered to the highest standard and tailor fit to your vehicle’s unique specifications. With intakes, exhaust, suspension, electronics, and more, aFe POWER has what you need to get every bit of performance out of your vehicle.

Fitment

This part fits the following vehicles.

• 2019-2026 Chevrolet Silverado 1500
• 2020-2026 Chevrolet Silverado 2500 HD
• 2020-2026 Chevrolet Silverado 3500 HD
• 2019-2026 GMC Sierra 1500
• 2020-2026 GMC Sierra 2500 HD
• 2020-2026 GMC Sierra 3500 HD

Features & benefits

• Simple, Plug-and-Play Installation
• Ultra Compact Device Mounts in the Cabin
• 3 Acceleration Modes w/ 18 Acceleration Programs
• Valet and Pedal Lock Mode Provide Protection Against Unauthorized Vehicle Use
• For Automatic Transmissions

Specifications

Warranty

3 Years

Magnuson-Moss Warranty Act

Legally, a vehicle manufacturer cannot void the warranty on a vehicle due to an aftermarket part unless they can prove that the aftermarket part caused or contributed to the failure in the vehicle (per the Magnuson Moss Warranty Act (15 U.S.C. 2302(C)).

California residents

WARNING: This product can expose you to chemicals including nickel, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.

Carb Status

California carb status to be completed