Brake Parts
Cooling Parts
Drivetrain & Transmission Parts
Electrical Parts
Engines Parts
Exhaust Parts
Foot Controls & Pegs
Frame & Body
Fuel Parts
Handlebars & Controls
Ignition System Parts
Mounts & Hardware
Performance Chips & Programmers
Racing Exterior & Body Parts
Starting & Charging Parts
Suspension Parts
Windshield & Fairings
Repair Manuals
Brake Parts
Cooling Parts
Drivetrain & Transmission Parts
Electrical Parts
Engines Parts
Exhaust Parts
Foot Controls & Pegs
Frame & Body
Fuel Parts
Handlebars & Controls
Ignition System Parts
Mounts & Hardware
Performance Chips & Programmers
Racing Exterior & Body Parts
Starting & Charging Parts
Suspension Parts
Windshield & Fairings
Repair Manuals
The S8 LED light bar from Baja Designs offers a slim and sleek design utilizing eight LEDs per 10-inch section. Lumens start at 6,324 raw lumens per 10" section, the S8 is available from 10" to 50" and features high-performance reflectors along with the additional feature of an amber backlight making the S8 a light bar that shines with your vehicle. The S8 LED light bar is backed by our 30-day Satisfaction Guarantee and Limited Lifetime Warranty giving you the ultimate in-purchase protection! NOTE:This light does NOT include a harness. The applicable harnesses are 640122 (On/Off with mode switch for backlight) or 640115 (On/Off 3-pin for one light 10"-30").
| Amperage Rating (A) | 4.200 |
|---|---|
| Average Rated Life (hr.) | 49,930 |
| Beam Pattern | Wide Cornering |
| Bezel Material | Billet Machined Aluminum |
| Brightness (Lumens) | 6324 |
| Color | Amber |
| Country Of Origin | USA |
| Depth (in.) | 3 |
| Description | Wide Cornering; Amber |
| Height (in.) | 1.600 |
| Housing Color | Black |
| Housing Material | Aircraft Grade Aluminum with Mil-Spec Hard Anodize |
| Length (in.) | 10 |
| Lens Color | Amber |
| Lens Material | Hardcoated Polycarbonate |
| Light Quantity | 1 |
| Lighting Modes | Beam/Amber Backlit Feature |
| Lighting Quantity | 8 |
| Lighting Technology | Cree LED |
| Lighting Type | Forward Projecting |
| Mounting Hardware Description | Mounting Brackets |
| Mounting Hardware Included | Yes |
| Mounting Hardware Material | Stainless Steel |
| Overvoltage Protection | Built-In |
| Patent No. | D780,964 |
| Product Type | S8 10 Inch LED Light Bar |
| Standards/Compliance (Durability) | Exceeds MIL-STD810G (Mil-Spec Testing) |
| Standards/Compliance (Impact Resistance) | IK10 Compliant (Mechanical Impact Testing) |
| Standards/Compliance (Water Resistance) | IP69K (Waterproof up to 9ft & Pressure Washable) |
| Universal Or Specific | Universal |
| Wattage (W) | 57.960 |
| Weight (lbs.) | 2.400 |
| Wiring Harness Included | No |
Legally, a vehicle manufacturer cannot void the warranty on a vehicle due to an aftermarket part unless they can prove that the aftermarket part caused or contributed to the failure in the vehicle (per the Magnuson Moss Warranty Act (15 U.S.C. 2302(C)).
Prop 65 WARNING: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
CLOSE ✕
Subscribe to our newsletter to receive exclusive offers, product recommendations, expert tips and more.