Turbo Thruster II Kit California Edition - Ford 99.5-03 7.3L (Pick-up only/No E-Series

Description

BD's Turbo Thruster II turbo utilizes a custom-designed 360-degree thrust bearing and is mated to a heavy wall backplate to increase durability and reduce heat. Additionally, to improve centrifugal strength at high speed, BD uses a 66 mm Ballistic Billet compressor wheel. To prevent boost creep, BD's exclusive Heavy Duty Waste Gate controls maximum boost pressure while the 0.84 A/R turbine housing reduces exhaust temperatures and smoke levels on acceleration without surging. This unit outperforms the stock turbocharger, improves fuel economy, and is a great fit for all off-road, street, and highway 7.3L Power Stroke applications. Plus, it is C.A.R.B. compliant!

Features & benefits

• GTP38 turbochargers are serviceable and come with a new oil resistant intake hose and clamp
• GTP38 Turbochargers Come With New Oil Resistant Intake Hose/Clamp
• BD designed sintered brass 360-degree 6-pad thrust bearing
• Great fit for off-road, street and highway applications!
• Reduced Heat Built-Up And Increased Bearing Durability
• Reduced heat build-up and increased bearing durability
• Reduced Exhaust Temperatures and Smoke Levels
• BD Designed Thrust Collar And Back Plate
• Hot Isotactic Pressed Compressor Wheel
• GTP38 Turbochargers Are Serviceable
• Ballistic Billet Compressor Wheel
• Turbine Wheel 68 mm / 2.68 in.
• Comp Wheel 63.5 mm / 2.50 in.
• Turbine Wheel: 68mm 2.68in
• BD's Heavy Duty Waste Gate
• Comp Wheel: 65.9mm 2.59in
• 0.84 A/R turbine housing
• BD Heavy Duty Wastegate
• 1.0 A/R Turbine Housing
• 1050 CFM / 525 HP
• 50 State Legal
• No surging
• Direct replacement - this turbocharger is built to match the performance of original equipment for specific vehicles
• Complete kit - comes with turbocharger and gasket kit for added convenience
• Thoroughly tested - part has undergone fit, performance and corrosion testing to ensure longevity and reliability
• Repair tip - also replace oil and coolant inlet and drain tubes (not included) to ensure turbo function

Specifications

Videos and guides

Magnuson-Moss Warranty Act

Legally, a vehicle manufacturer cannot void the warranty on a vehicle due to an aftermarket part unless they can prove that the aftermarket part caused or contributed to the failure in the vehicle (per the Magnuson Moss Warranty Act (15 U.S.C. 2302(C)).