Brake Parts
Cooling Parts
Drivetrain & Transmission Parts
Electrical Parts
Engines Parts
Exhaust Parts
Foot Controls & Pegs
Frame & Body
Fuel Parts
Handlebars & Controls
Ignition System Parts
Mounts & Hardware
Performance Chips & Programmers
Racing Exterior & Body Parts
Starting & Charging Parts
Suspension Parts
Windshield & Fairings
Repair Manuals
Brake Parts
Cooling Parts
Drivetrain & Transmission Parts
Electrical Parts
Engines Parts
Exhaust Parts
Foot Controls & Pegs
Frame & Body
Fuel Parts
Handlebars & Controls
Ignition System Parts
Mounts & Hardware
Performance Chips & Programmers
Racing Exterior & Body Parts
Starting & Charging Parts
Suspension Parts
Windshield & Fairings
Repair Manuals
So I plugged it up right works like a charm, very satisfied but when I cut it off, there’s one tiny LED light that stays on like it’s not as bright as the others when the bike is on, but check this. I unplugged everything turn signal wires and all and it stays on even with nothing plugged in is this normal or is it gonna drain my battery right now I’m not worried about it but if it drains my battery I’ll be worried or I’m convinced it’s a magic light.
This is described as a universal fit part. Understand that they mean universal fit for 7/8 inch handlebars. They are not designed to fit 1 inch bars. That being said, some wraps of the rubber bushing with some electrical tape (I like the sticky fabric type) will make it work in 1 inch bars. Finish is OK and pretty good for an inexpensive part.
The oil did not perform as well as I've hoped. It may be better for other bikes. Even so, delivery was so fast and customer service was 5 stars. Good job.
Ordered the one to replace my bike’s old air filter. This is an excellent reusable filter for a fraction of a price. Easy to fit. Works as great as advertised, well made using quality materials. Seems to be a long-lasting investment, claimed to resist corrosion, the time will show.
Like this BikeMaster paint polish. Does its job as great as advertised. Handy to remove scratches or light oxidation and restore the faded finish to its original condition so it looks as good as new. Easy to use. The manufacturer recommends following up with its Poly Wax to maximize the glossy look and protection. Haven’t tried it yet.
This stand can barely hold my Yamaha R1. It’s lightweight, and that’s great, but it will only work for something that’s not heavier than 250 pounds, I suppose. If you have a larger bike, I'd recommend looking elsewhere.
Just what you gotta have on hand for auto and motorcycle maintenance. The cup is amazing! Very handy and provides accurate measurements. I use it for oil and transmission fluid changes, and I like that I no more have to guess how much oil or transmission fluid I have poured. It's easy to store and has a good lid. Best value for the money!
Used it for cleaning my bike. Worked well, made the clean up much easier and quicker. After the use of these brushes, my bike looks nice and tidy.
This is a great solution for bike storage and maintenance. I like that it's solid and very well built. And I can easily adjust height and wheel diameter. The only thing I didn’t like is that I had to bolt this stand down to minimize movement when rolling the bike up. Other than that, a perfect bike stand.
I love how compact and convenient these things are! My family loves them also. They don’t take much space, but when you add a little water, they expand significantly. You can use these wet cloth towels for cleaning your hands, face, goggles, and even for wiping your bike. I’m so happy I’ve found them. They are perfect for trail use or during long trips.
Excellent product, easy to use. I like the product, it does its job very well. It’s well built, and the oil container seems to be sturdy. Expect it to last for several years. So, if you want to save your time, use this fluid extractor.
If your bike holds more than 3 quarts, you can end up with a mess coz this thing is too small. I want to buy a bigger one. As for this one, I’m gonna use it for my lawnmower coz it won't work for something bigger, I guess. Well, maybe for a scooter.
Great product, use it for oil. It’s well made and works well for hard-to-reach spots.
Although I haven’t used them long enough to say how long they last, but I’m very satisfied so far! First of all, they work the way they should. You’ll get great stopping power even on wet and muddy roads. Then they are super easy to install. Nice price! No complaints about these pads.
I would definitely buy these brake shoes again. They work as I expected, if not better. The braking is so much better than with previous shoes. Now, it’s too early to tell whether they’re long-lasting or not, but they seem very durable. Fit like a glove. So I give them nothing but five stars.
Nice soft brake feel. Hope they will not wear fast. Looks like made from quality materials. I do not care much about the aesthetics of my braking system, I just want it to work properly.
Great tool, service is good, had a broken old 1/4 stud got it right out.
Easy to get up and running. Seems to be working great.
This lever fit perfectly on the bike, we purchased it for and has been preforming excellent, we had no issues installing it. We will purchase from here again if we need any other parts.
Turn signals (2) came with 12volt bulbs, double filament. I specifically requested 6volt single filament for my motorcycle. Spent around $50 for the pair and now I can’t use them. Very disappointed. Dennis.
The hard shell from the chrome to end is a much better material than I had before.
Fit perfectly and works as good or better than OEM.
These are OEM style, not actually OEM mirrors! I was a dummy and bought them to replace my old actual OEM mirrors. As soon as I held these up to the real OEM mirrors, the differences were clear. The mirror arm angle wasn't quite right, the lines on the mirror sharp, everything was just a little off. It's fine as a $30 mirror, just know it's not as good as the real thing!
These are pretty much identical to the factory mounts that come on the Triumph Speed Triple that I was working on, so they fit just like original equipment. As far as quality goes, the coating seems to be fine, the threads held the mirror in place, the bike has two mirrors on it again. Parts were shipped on time.
Installed perfectly, works as it should and the device was just wonderful. Had to have it over night so I could race then next day. 9:30 the next morning it’s on my porch.
These brake shoes are very well made and finished. Seem so durable. I think they will last for quite a while. Fast shipping. Highly satisfied.
Replaced my stock brake pads with BikeMaster pads. They fit right and are easy to install. Stopping performance is the same as with OE pads. Less dusty than OE. Overall, the brake feel is improved. Good. And the price is great!
BikeMaster has been making motorcycle parts, tools and accessories since 1981, when Ed Tucker launched the brand with basic items like mirrors and tie-down straps. Over more than four decades it has grown into a full catalog for riders who do their own work. It’s sold through Tucker Powersports and motorcycle and UTV dealers across the U.S. When the brand turned 40 in 2021, it said its products had been part of millions of bike projects. The idea is simple: give everyday riders well-made parts that keep a bike running, improve how it performs, or make it fit the rider better, without premium-brand prices.
The brand is aimed at DIY riders, the “Yeah, I can fix that” crowd: weekday commuters, weekend explorers, trail riders, track-day regulars and anyone who works on their own bike in the garage. Its tagline, “We have everything you need to be one with your bike,” fits the size of the range. It covers maintenance and wear parts like brake pads and rotors, chains and sprockets, air and oil filters, gaskets, and batteries and chargers. It also covers controls, ignition, lighting, fuel delivery, exhaust and suspension, plus cleaners, lubricants, protective gear and apparel.
Tools and shop gear are a big part of the brand. BikeMaster sells hand tools, impact drivers, specialty tools, toolboxes with complete tool sets, sag scales, shop stools, and loading ramps for both professional technicians and home mechanics. Its parts fit the major Japanese makes (Honda, Yamaha, Kawasaki and Suzuki) as well as BMW, Triumph, Ducati, Moto Guzzi and Can-Am. That makes BikeMaster a dependable choice whether you’re doing a basic service, rebuilding a project bike or setting up your own workshop.
Subscribe to our newsletter to receive exclusive offers, product recommendations, expert tips and more.