Rocker Arm Hi-Energy CB 1.7 N

Description

This nitrided COMP Cams High Energyâ„¢ Steel Stud Mount Rocker Arm designed for 1965-87 Chevy 396-454 Applications features a 7/16" Stud diameter and 1.7 ratio. High Energyâ„¢ Rockers help eliminate the noise and slop associated with older worn and high mileage stock Rocker arms. With a long slot for higher than stock lift Camshafts, these Rocker arms are an excellent replacement choice for engine rebuilds using either stock or High Energy Camshaftsâ„¢. This Rocker has been nitrided to increase surface hardness for improved initial and long-term wear characteristics. The nitriding process increases hardness by causing an infusion of nitrogen molecules into the material's surface. This improves both the lubricity and wear resistance of the material.Excellent replacement Rocker arms for engine rebuilds with a stock or High Energy Camshaftâ„¢Help to eliminate noise and slop associated with worn or high mileage stock Rocker armsInclude adjusting nuts and pivot balls where requiredFeature a long slot for higher than stock lift CamshaftsNitrided Rocker arms designed for higher spring pressures and hardened Pushrods

Features & benefits

• Melling lists rocker arms for both domestic and import applications. Depending on OEM design specifications, Melling rocker arms are provided in either stamped or cast materials. Each rocker arm is built from only the best materials and manufacturing processes available. Melling recommends installing new rocker arms and components with every engine rebuild to assure long engine life and the most efficient performance.

Videos and guides

Magnuson-Moss Warranty Act

Legally, a vehicle manufacturer cannot void the warranty on a vehicle due to an aftermarket part unless they can prove that the aftermarket part caused or contributed to the failure in the vehicle (per the Magnuson Moss Warranty Act (15 U.S.C. 2302(C)).