DEI Reflect-A-GOLD 24in x 24in Sheet

Description

Reflect-A-GOLD(TM) solves the problem of heat soak into air boxes, seats, firewalls, transmission tunnels and intakes. Reflect-A-GOLD is an adhesive heat shield made from a metalized polyimide laminated to a light weight glass fiber cloth with a high temperature pressure sensitive adhesive for use in extreme temperature swing environments. Our lightweight, adhesive thermal shielding is easily applied and won't lift off. It's minimal clearance and ease of use makes Reflect-A-GOLD a highly effective material for firewalls, fuel cells, engine covers, under hoods, engine compartment, bulk heads, seat bottoms, and anything or area that needs protection from heat. For firewalls, bulkheads, engine covers, floors, seat bottoms & more Handles continuous temps up to 800°F Resists UV degradation for long-term performance Adhesive protected by release liner rated up to 325°F 0.0065 in. thick Easy to apply, won't lift off *DO NOT apply directly to exhaust components.

Features & benefits

• For Firewalls/Bulkheads/Engine Covers/Floors/Seat Bottoms
• Handles Continuous Temps Up To 800 Degrees F
• Resists UV Degradation For Long-Term Performance
• Adhesive Protected By Release Liner Rated Up To 325 Degrees F
• Virtually NO Clearance Needed
• Light Weight And Flexible-Trim To Size
• 0.0065 in. Thick
• Easy To Apply- Wont Lift Off
• Direct replacement - this heat reflective tape replaces brittle, cracked or missing reflective material to minimize heat transfer
• Quality materials - this heat tape is made from aluminum to reduce heat transfer
• Ready to install -self-adhesive backing makes installation simple and can be secured with clamps for added security
• Universal application - this heat tape can be used to reduce heat transfer on a variety of high-temperature components

Specifications

Warranty

1 Year

Videos and guides

About Design Engineering

Design Engineering, Inc.(TM) is one of the foremost suppliers of thermal tuning product featuring products for racers, street performance enthusiasts, and hobbyists alike. In addition to supplying the performance aftermarket with thermal tuning products, Design Engineering serves the needs of the powersports, marine, industrial and commercial industry markets the world over.

Magnuson-Moss Warranty Act

Legally, a vehicle manufacturer cannot void the warranty on a vehicle due to an aftermarket part unless they can prove that the aftermarket part caused or contributed to the failure in the vehicle (per the Magnuson Moss Warranty Act (15 U.S.C. 2302(C)).

California residents

WARNING: This product contains a chemical known to the State of California to cause cancer and/or birth defects or other reproductive harm. www.P65Warnings.ca.gov