Design Engineering Authorized Dealer

Vapor Block Fuel Line Sleeve 3/8in x 36in

Part Number 10671 (132781088)

UPC: 607078106711

Package contents: 1 Each per Package

Color

$12.93 ~~$16.43~~ SAVE 21%

In stockShips by 10th Nov

Description

Vapor Block(TM) solves the problem of fuel and other fluids boiling from extreme heat and causing a vapor lock situation. Prevent rough idling and difficult starting caused by vapor lock with DEI Vapor Block(TM). Vapor Block(TM) fuel line sleeve was specifically developed to prevent vapor lock in fuel systems by greatly reducing heat in the line to keep fuel cooler and below boiling. Vapor Block(TM) installs easily with a split design and adhesive flap. There is no need to disconnect the fuel line to install. Simply wrap Vapor Block(TM) around the line, remove the adhesive liner and press the adhesive flap into place. Made of glass fiber and polyester laminated to an aluminum outer layer, Vapor Block(TM) offers excellent long lasting thermal protection without paying for expensive repairs or modifications. 5/8 in. (16mm) inside diameter x 36 in. Split design with adhesive flap Use on fuel lines to prevent vapor lock Can be used on any cable, hose or line for added heat protection Easy to cut to size Note: Items with custom cut patterns and/or custom cut lengths of material cannot be returned. *DO NOT apply directly to exhaust components.

Features & benefits

Split Design With Built In Adhesive Flap
Use On Fuel Lines To Prevent Vapor Lock
Easy To Cut To Size
Can Be Used On Any Cable/Hose Or Line For Added Heat Protection
3/8 in. -10 mm I.D. X 36 in

Specifications

Color	Chrome
Country Of Origin	USA
Direct Heat Resistance	340°F
Includes	One 36 inch length of Vapor Block with a 3/8 inch inside diameter.
Inside Diameter	10 mm
Length	36 in
Material	Glass Fiber/Polyester Laminated/Aluminum
Max Temperature Rating	N/A
Product Length	3 ft.
Style	Carbureted
Width	0.375 in

Warranty

1 Year

Videos and guides

Installation Instructions PDF Installation Instructions PDF

About Design Engineering

Design Engineering, Inc.(TM) is one of the foremost suppliers of thermal tuning product featuring products for racers, street performance enthusiasts, and hobbyists alike. In addition to supplying the performance aftermarket with thermal tuning products, Design Engineering serves the needs of the powersports, marine, industrial and commercial industry markets the world over.

Magnuson-Moss Warranty Act

Legally, a vehicle manufacturer cannot void the warranty on a vehicle due to an aftermarket part unless they can prove that the aftermarket part caused or contributed to the failure in the vehicle (per the Magnuson Moss Warranty Act (15 U.S.C. 2302(C)).

California residents

WARNING: This product contains a chemical known to the State of California to cause cancer and/or birth defects or other reproductive harm. www.P65Warnings.ca.gov