Exhaust Wrap Kit 2" x 50' Black

Description

Wrapping headers and down pipes is an important first step in reducing unwanted and power-robbing under hood heat. Less under hood heat results in a cooler air charge for improved performance and keeping exhaust gases hotter within the exhaust system helps in decreasing exhaust density & increases exhaust flow. Reduce under hood temperatures by 50% Decreases exhaust density & increases exhaust flow Improves horsepower Withstands 1200F direct/2000F radiant Added durability and heat retention Kit contains: Two (2) rolls of 2 in. x 50' black exhaust wrap Four (4) 14 in. stainless steel locking ties Eight (8) 8 in. stainless steel locking ties NOTE: Catalytic Convertors: Wrapping of the catalytic converter is not recommended, as overheating can lead to reduced lifetime of the converter. Instead, try our Corvette Catalytic Converter Shield or create your own shield using our Floor & Tunnel Shield II(TM). Removal: Exhaust wrap is not designed to be moved or removed after it has been heat cycled. After the fibers have been heated, they lose their initial flexibility. This does not reduce the thermal properties of the exhaust wrap. Be aware of this before you decide to remove the wrap. For this reason, you should avoid wrapping any flex-pipes or flex-joints. Titanium Exhaust Pipe Systems: DEI does NOT recommend wrapping exhausts made of titanium. The alloys used in the production of titanium exhaust systems tend to be thin and are designed to dissipate heat quickly. Wrapping any titanium exhaust pipe, regardless of brand, can hold in too much heat, and make the titanium alloy turn brittle and prone to premature cracking. If you are seeking to reduce the heat on a titanium exhaust system, DEI recommends using alternatives such as our flexible heat shields.

Design Engineering, Inc.(TM) is one of the foremost suppliers of thermal tuning product featuring products for racers, street performance enthusiasts, and hobbyists alike. In addition to supplying the performance aftermarket with thermal tuning products, Design Engineering serves the needs of the powersports, marine, industrial and commercial industry markets the world over.

Features & benefits

• Includes Two Rolls Of Exhaust Wrap/Four 14 in. Ties/Eight 8 in. Ties
• Reduce Under Hood Temperatures By 50 Percent
• Decreases Exhaust Density And Increases Exhaust Flow
• Improves Horsepower
• Withstands 1200 Degrees F Direct/2000 Degrees F Radiant
• Direct replacement - This exhaust heat shield fits and performs like the original equipment on specific vehicles
• Reliable fit - precision-engineered to match the design and dimensions of original components
• Durable construction - manufactured to strict standards using sturdy, safe materials
• Rigorously tested - this design has undergone material and on-vehicle fit testing

Specifications

Warranty

1 Year

Magnuson-Moss Warranty Act

Legally, a vehicle manufacturer cannot void the warranty on a vehicle due to an aftermarket part unless they can prove that the aftermarket part caused or contributed to the failure in the vehicle (per the Magnuson Moss Warranty Act (15 U.S.C. 2302(C)).

California residents

WARNING: This product contains a chemical known to the State of California to cause cancer and/or birth defects or other reproductive harm. www.P65Warnings.ca.gov