Brake Parts
Cooling Parts
Drivetrain & Transmission Parts
Electrical Parts
Engines Parts
Exhaust Parts
Foot Controls & Pegs
Frame & Body
Fuel Parts
Handlebars & Controls
Ignition System Parts
Mounts & Hardware
Performance Chips & Programmers
Racing Exterior & Body Parts
Starting & Charging Parts
Suspension Parts
Windshield & Fairings
Repair Manuals
Brake Parts
Cooling Parts
Drivetrain & Transmission Parts
Electrical Parts
Engines Parts
Exhaust Parts
Foot Controls & Pegs
Frame & Body
Fuel Parts
Handlebars & Controls
Ignition System Parts
Mounts & Hardware
Performance Chips & Programmers
Racing Exterior & Body Parts
Starting & Charging Parts
Suspension Parts
Windshield & Fairings
Repair Manuals
Great selection of products and fast shipping. However, what makes them the best is their customer service. I had a shipping issue and they not only responded promptly to my email, but also resolved the issue in a timely and caring manner. I would highly recommend purchasing from them to anyone.
This hose was exactly what I needed and for a 90 year old man, it went very well!
Get lots compliments
Product fit exact and is performing as expected
Installed. Fits as advertised. Checks good.
The reason I chose it is because I am sure that the Ford water pump. It will break down. This is the second time he replaced it. At 90,000 kilometers.
Had I known what I was getting into, I might have changed my mind. Before tackling this project, I researched the installation process and found little information. I have years of professional mechanic experience and tools but never got into a Lexus RX. Hopefully, my experience may help the next person who attempts DIY installing these parts. It is important to note that the tensioner mount is sandwiched between the A/C compressor and engine block so unbolting the compressor is required. Getting to it is a royal pain as is putting everything back together. Plan on spending several hours to install this part. If had to do it again, I'm sure it would be easier. The front end of the car will need to be jacked up and the RF wheel removed. There is a decent video on YouTube for an alternator R&R which covers most of these steps. 1. Drain and collect coolant 2. Disconnect battery 3. Disconnect upper radiator hose 4. Remove radiator fan assembly 5. Remove old serp belt 6. Remove lower radiator hose 7. Remove alternator (small bracket on the back holding a compressor wire is difficult to access both ways) 8. Unbolt A/C compressor 9. Remove old tensioner 10. Reverse the process to install. Good luck!
Perfect fix to a fan that would not turn off. Dealer said I needed to replace the entire fan. This swap took about 10 mins and has been working great since.
I had a task that warranted owning a set of these, it's always nice to have a job with a pay-back from a tool purchase. I couldn't have been happier with this set, great quaity.
Very happy with the blue gates rpm belt, thanks.
I’ve used OEM, Gates entry level, mid grade, and the Redline versions on my Sportsman 570. The claim that the Redline is the best as tested under rigorous conditions is talk. When put to the real test, fail just like all the others. I’ve learned paying for the high priced belts gets me no added time, just costs double. Warranty, how when all that’s left are small chunks and strands. Hardcore Canadian rider!!
Arrived on time and fit perfectly.
All parts fit in just right. No problems replacing original equipment.
Works great and thanks for fast shipping!
Saved me $600+ do this easy job myself.
The hose looks very good. If you are repairing the cooling pipes of an automatic transmission, this is what you need. You can use power clamps.
The hose looks very good. If you make a custom hydro power pipe this is what you need.
Just put on my Lexus LS. Very satisfied.
Came with everything i needed to install. Works perfect, took care of my issue! Thanks again!
The ad was well-described. The hose arrived quickly, fit perfectly and performs as expected. No problems.
I used these hoses for my hot rod. I have a 1950 Ford blown Flathead motor in my 1935 Ford Coupe and they fit and function perfectly!
Fit my Ram perfect. Stopped that noisy old idler and belt from squealing by replacing it with this set.
Gates is some good quality stuff. In my experience anyway. The pressure hose fits perfectly and has a good seal at both the pump side, and the gear side. I recommend this hose if you have an old dirty, possibly leaking hose.
Excellent product, exactly like the OEM. Just what I needed, thanks.
Perfect fit, looks strong. Service was excellent.
The parts are correct, but, if you don't need to change the rings on the distributor (the flat rings) don't! The rings actually stretch during installation, and then you will need a special tool to compress them to install it back into its bore. If you have a leaking rack shaft seal as I did, just change all you can, but re-install the distributor as is, or just with a new seal & dust cover. Better instructions, and advise special tools will be needed. Also where can I get the special tool?
The belt fits perfect on my Gator 825i. I haven’t had it long enough to determine the longevity, but it seems like great quality. I’m hoping it will last years.
It bolted in correctly and worked out well! Though I did have to bend it a little bit to clear the rack, but other than that there were no issues.
Good deal.
This water pump looked like what it was described as. It was the correct one for my 2008 4.6l F150 truck, it installed very easy. When the time comes to replace the water pump I will certainly buy another one without delay.
I bought 2 heavy duty belts for my Arctic Cat Alterra 500. The original belt went out at 14months. The first heavy duty belt lasted 4 hrs. The second lasted 6hrs. I wasted lots of money and time on the phone and web to find out that the heavy duty belt was the problem. I put an Arctic Cat belt on it and she’s still purring like a kitten. Need more information about what’s the best application and not the best application from people who have used the belts.
Very pleased with the quality of the product. I’d need to report back after another 100K miles are put on the car. Great price/quality product.
The belt looks to be of good quality. Only time will tell if it holds up.
The belt looks and appears to be stronger than an OE belt and fits perfect. It was an easy install and the break in process went very well.
Fits to a tee, was packaged nicely and securely. Came with instructions. Overall completed the job in around 30 minutes. With very little vehicle knowledge even I could install.
Solid construction that fits exactly as it should with absolutely no hassle or quirks whatsoever. It's dirt cheap and you can literally just screw it on after removing the old cap altogether. There really isn't anything else you can ask for.
For the past century Gates has been powering progress as one of the world’s leading parts manufacturers in the automotive industry, working with virtually every Original Equipment Manufacturer worldwide to design products for new vehicles as they are being developed. These strong relationships together with Gates commitment to continuous innovation enable us to offer a complete line of OE quality products for the Aftermarket. From Timing Belts to Micro-V Belts, Tensioners and Hose, for both import and domestic vehicles, install with confidence, install Gates.
Subscribe to our newsletter to receive exclusive offers, product recommendations, expert tips and more.