Premium Molded Heater Hose

Description

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today?s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.

For the past century Gates has been powering progress as one of the world’s leading parts manufacturers in the automotive industry, working with virtually every Original Equipment Manufacturer worldwide to design products for new vehicles as they are being developed. These strong relationships together with Gates commitment to continuous innovation enable us to offer a complete line of OE quality products for the Aftermarket. From Timing Belts to Micro-V Belts, Tensioners and Hose, for both import and domestic vehicles, install with confidence, install Gates.

Fitment

This part fits the following vehicles.

• 1987-1991 Chevrolet Blazer
• 1997, 1999 Chevrolet C1500
• 1997-1999 Chevrolet C1500 Suburban
• 1987 Chevrolet C20
• 1995, 1997, 1999 Chevrolet C2500
• 1995, 1997-1999 Chevrolet C2500 Suburban
• 1987, 1997, 1999 Chevrolet C35
• 1995, 1997, 1999 Chevrolet C3500
• 1997, 1999 Chevrolet K1500
• 1997-1999 Chevrolet K1500 Suburban
• 1995, 1997, 1999 Chevrolet K2500
• 1995, 1997-1999 Chevrolet K2500 Suburban
• 1995, 1997, 1999 Chevrolet K3500
• 1987 Chevrolet R10
• 1987-1988 Chevrolet R10 Suburban
• 1989-1991 Chevrolet R1500 Suburban
• 1987-1988 Chevrolet R20
• 1987-1988 Chevrolet R20 Suburban
• 1989 Chevrolet R2500
• 1989-1991 Chevrolet R2500 Suburban
• 1987-1988 Chevrolet R30
• 1989-1991 Chevrolet R3500
• 1987-1991 Chevrolet Suburban
• 1997, 1999 Chevrolet Suburban 1500
• 1997, 1999 Chevrolet Tahoe
• 1987 Chevrolet V10
• 1987-1988 Chevrolet V10 Suburban
• 1989-1991 Chevrolet V1500 Suburban
• 1987 Chevrolet V20
• 1987-1988 Chevrolet V20 Suburban
• 1989-1991 Chevrolet V2500 Suburban
• 1987-1988 Chevrolet V30
• 1989-1991 Chevrolet V3500
• 1997, 1999 GMC C1500
• 1997-1999 GMC C1500 Suburban
• 1995, 1997, 1999 GMC C2500
• 1995, 1997-1999 GMC C2500 Suburban
• 1995, 1997, 1999 GMC C3500
• 1987-1991 GMC Jimmy
• 1997, 1999 GMC K1500
• 1997-1999 GMC K1500 Suburban
• 1995, 1997, 1999 GMC K2500
• 1995, 1997-1999 GMC K2500 Suburban
• 1995, 1997, 1999 GMC K3500
• 1987 GMC R1500
• 1987-1991 GMC R1500 Suburban
• 1987-1989 GMC R2500
• 1987-1991 GMC R2500 Suburban
• 1987-1991 GMC R3500
• 1987 GMC V1500
• 1987-1991 GMC V1500 Suburban
• 1987 GMC V2500
• 1987-1991 GMC V2500 Suburban
• 1987-1991 GMC V3500
• 1997, 1999 GMC Yukon

Features & benefits

• Has all the quality features of Gates molded coolant hose and similar to OEM specifications
• Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
• Engineered to resist electrochemical degradation ? the leading cause of hose failure
• Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
• EPDM tube, synthetic fiber knit reinforcement, EPDM cover
• Caution: Do not use for fuel or oil transfer applications
• Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
• Engineered to resist electrochemical degradation – the leading cause of hose failure

Specifications

Magnuson-Moss Warranty Act

Legally, a vehicle manufacturer cannot void the warranty on a vehicle due to an aftermarket part unless they can prove that the aftermarket part caused or contributed to the failure in the vehicle (per the Magnuson Moss Warranty Act (15 U.S.C. 2302(C)).