Needle Jet

Description

The 785-24001-O-2 is a brass needle jet from Mikuni’s 389 series, made to fit TM32–TM38 flat-slide carburetors. It has a slightly larger bore than the O-0, giving the engine a bit more fuel during mid-throttle. This helps smooth out acceleration without making the mixture too rich, ideal if the motor feels a little lean in the middle range.

- Jet Series: 389

- Fits: TM32, TM34, TM36, TM38 Mikuni flat-slide carbs

- Material: Brass

- Length: About 47 mm

- Head Diameter: Around 6.5 mm

- Shaft Diameter: Roughly 5.2 mm

- WARNING:Cancer and Reproductive Harm www.P65warnings.ca.govwww.P65Warnings.ca.gov | WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Magnuson-Moss Warranty Act

Legally, a vehicle manufacturer cannot void the warranty on a vehicle due to an aftermarket part unless they can prove that the aftermarket part caused or contributed to the failure in the vehicle (per the Magnuson Moss Warranty Act (15 U.S.C. 2302(C)).

California residents

WARNING: This product can expose you to chemicals including nickel, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.