Brake Parts
Cooling Parts
Drivetrain & Transmission Parts
Electrical Parts
Engines Parts
Exhaust Parts
Foot Controls & Pegs
Frame & Body
Fuel Parts
Handlebars & Controls
Ignition System Parts
Mounts & Hardware
Performance Chips & Programmers
Racing Exterior & Body Parts
Starting & Charging Parts
Suspension Parts
Windshield & Fairings
Repair Manuals
Brake Parts
Cooling Parts
Drivetrain & Transmission Parts
Electrical Parts
Engines Parts
Exhaust Parts
Foot Controls & Pegs
Frame & Body
Fuel Parts
Handlebars & Controls
Ignition System Parts
Mounts & Hardware
Performance Chips & Programmers
Racing Exterior & Body Parts
Starting & Charging Parts
Suspension Parts
Windshield & Fairings
Repair Manuals
Unleash your 2021-2024 2.3L EcoBoost Ford Bronco's full potential with the Mishimoto High-Mount Intercooler Kit! Designed to allow your Bronco to breathe the coldest, densest air possible, this high-mount intercooler kit is comprised of our high-mount intercooler and performance intercooler pipe kit.----We've relocated the intercooler to the upper grille to allow better airflow at all times, even with winches, light bars, or larger bumpers installed. This location also helps protect the intercooler from obstacles on the trail. Our intercooler utilizes a 3.1 inch-thick bar-and-plate core that's precision TIG welded to cast aluminum end tanks for superior durability and heat soak resistance. The weak plastic stock piping is replaced with high-flowing, durable aluminum piping and silicone boots with DuraCore technology. The larger volume of our pipes allows your 2.3L EcoBoost to breathe freely and make the most of its turbo, while the all-aluminum construction and DuraCore boots provide unmatched durability.----Durability is always a good thing, but it's even better when it's paired with performance. The high-mount intercooler boasts a 49-percent greater core volume and 93-percent greater external fin surface area than stock, which results in 21-degree cooler outlet temps over the stock intercooler. We also saw exceptional improvement in our trail simulation heat-soak testing where, after 6 back-to-back dyno runs, we still saw outlet temperatures 20-degrees cooler than stock.----This intercooler kit is available with a stealth black or sleek silver intercooler and micro-wrinkle black powder coated or polished pipes to match any style. Functionality of adaptive cruise control is retained utilizing a relocation bracket and 360-degrees cameras are unaffected. As with all our products, the Mishimoto 2021-2024 Ford Bronco 2.3L High-Mount Intercooler kit is backed by our signature Mishimoto Lifetime Warranty and comes with all necessary hardware for easy installation.
Mishimoto, the world leader in performance cooling products, was created for automotive enthusiasts by automotive enthusiasts. Established in 2005, we have two decades of experience in working toward our goal of providing superior cooling system upgrades. Mishimoto has produced a line of upgrades to fit nearly any application, including sport compacts, powersports, trucks, Jeeps, muscle vehicles, daily drivers, and the classics.
This part fits the following vehicles.
| Cold Side Pipe Inside Diameter | 3 in |
|---|---|
| Color | Polished |
| Core Color | Black |
| Core Construction | Bar-and-Plate |
| Core Height | 8.8 in |
| Core Length | 21.26 in |
| Core Material | Aluminum |
| Core Thickness | 3.15 in |
| Country Of Origin | CN |
| Coupler Color | Black |
| Coupler Material | Silicone |
| End Tank Construction | Cast |
| End Tank Material | Aluminum |
| Grade Type | Performance |
| Hose Clamps Included | Yes |
| Hot Side Pipe Inside Diameter | 3 in |
| Inlet Diameter | 3 in |
| Install Difficulty | N/A |
| Intercooler Type | Air-to-Air |
| Maximum Boost Pressure | 0 ps |
| Maximum Horsepower | 0 hj |
| OptionLabel | Black Core, Polished Pipes |
| Outlet Diameter | 3 in |
| Pipe Color | Polished |
| Pipe Finish | Powder Coated |
| Pipe Material | Aluminum |
| SellingPoint01 | Direct fit for 2021-2024 Ford Bronco 2.3L EcoBoost |
| SellingPoint02 | Relocates intercooler for better airflow with winches, lights, and other off-road accessories |
| SellingPoint03 | Dyno-proven max gains of 4.5 hp and 10.8 lb-ft torque |
| SellingPoint04 | Includes adaptive cruise control relocation mount and does not interfere with 360-degree cameras |
| SellingPoint05 | 21-degree reduction in outlet temperature over stock intercooler |
| SellingPoint06 | Allows for improved clearance, entry and exit angle, and keeps your intercooler protected from obstacles on the trail |
| SellingPoint07 | 49-percent greater core volume for high-efficiency cooling |
| SellingPoint08 | Durable bar-and-plate core for superior durability and performance |
| SellingPoint09 | Optimal core design for maximum cooling efficiency with minimal pressure drop |
| SellingPoint10 | Cast aluminum end tanks for increased pressure tolerance and reliability |
| SellingPoint11 | 1/8 NPT port on cold-side pipe for methanol injection or additional sensors |
| SellingPoint12 | Includes Mishimoto Silicone Boots with DuraCore technology for superior resistance to heat, pressure, fuel, and oil |
| SellingPoint13 | Available with a stealth black or sleek silver intercooler and micro-wrinkle black powder coated or polished pipes to match any style |
| SellingPoint14 | Patent Pending |
| SellingPoint15 | Mishimoto Lifetime Warranty |
| Street Legal | Yes - Except CA |
| TechSpec Applications | 2021-2024 Ford Bronco 2.3L EcoBoost |
| TechSpec Centerline Radius | N/A |
| TechSpec Chassis Codes | N/A |
| TechSpec Core Height (in) | 8.8 |
| TechSpec Core Length (in) | 21.26 |
| TechSpec Core Thickness (in) | 3.15 |
| TechSpec Core Type | Bar-And-Plate |
| TechSpec Engine Codes | 2.3L EcoBoost |
| TechSpec Inlet (in) | 3 |
| TechSpec Installation Notes | N/A |
| TechSpec Maximum Recommended Boost Pressure (PSI) | N/A |
| TechSpec Maximum Recommended Horsepower | N/A |
| TechSpec Note | Please note: Adaptive cruise control may function to a lesser degree compared to stock intercooler setup.----Does not fit Raptor Bronco with 3.0L EcoBoost |
| TechSpec Outlet (in) | 3 |
| TechSpec Overall Height (in) | 18.6 |
| TechSpec Overall Length (in) | 35.82 |
| TechSpec Overall Width (in) | 6.15 |
| TechSpec Pipe Diameter | N/A |
| TechSpec Pipe Length | N/A |
| TechSpec Pipe Shape | N/A |
| TechSpec Weight (lbs) | N/A |
| Universal Or Specific Fit | Specific |
WARNING: This product can expose you to chemicals including nickel, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
California carb status to be completed
CLOSE ✕
This part is vehicle specific - for a guaranteed fit please close this window and select your ride. Click confirm to add to your cart anyway.
HOLSTEIN
04-09 Toyota Prius (1.5) ABS Wheel Speed Sensor - Front Right
$56.97
No image
HOLSTEIN
97-04 Mitsubishi Diamante (3.5) ABS Wheel Speed Sensor - Rear Right
No image
Subscribe to our newsletter to receive exclusive offers, product recommendations, expert tips and more.