Sentinel Handguards Atv/Mx Mount Kit

Description

PowerMadd?s ATV/MX mount kit comes with two aluminum brackets which can be positioned to mount over the top or underneath the levers

To mount the guards you will need to find ½? of space on the bar as close to the handgrip as possible

You may need to move your levers, throttle blocks, etc. in order to make room for the mounting bracket

Includes (2) aluminum brackets; (2) steel straps; (2) M6 x 75mm hex head bolts; (2) M6 x 25mm hex head bolts; (2) M6 lock nuts; (2) M5 x 10mm button head screws; (4) large spacers; (2) flat washers and (4) small spacers

Requires 3mm hex wrench and a 10mm wrench

Note: This mount kit will not work on 2007 and up Yamaha Grizzly

Specifications

Magnuson-Moss Warranty Act

Legally, a vehicle manufacturer cannot void the warranty on a vehicle due to an aftermarket part unless they can prove that the aftermarket part caused or contributed to the failure in the vehicle (per the Magnuson Moss Warranty Act (15 U.S.C. 2302(C)).

California residents

WARNING: This product can expose you to chemicals including nickel, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.