Sentinel Handguards Snowmobile Hayes Brake Mount Kit

Description

- PowerMadd’s Sentinel Hanguard Hayes Brake Mount mounting brackets are designed to mount to the bare handlebar somewhere near your grip and the controls - You will need ½” of space to mount the bracket - Inlcudes a straight aluminum bracket - throttle side; a Hayes aluminum bracket - brake side; a steel strap long – throttle side; a M6-1.0 x 60mm Torx pan head screw; (2) M6 x 75mm hex head bolt; a M6 x 25mm hex head bolt; (2) M6 lock nuts; a square nut; (4) large spacers; a flat washer; a M5x10mm button head screw and (4) small spacers - Requires a 3mm hex wrench, (2) 10mm wrenches and a T30 torx wrench

Specifications

Magnuson-Moss Warranty Act

Legally, a vehicle manufacturer cannot void the warranty on a vehicle due to an aftermarket part unless they can prove that the aftermarket part caused or contributed to the failure in the vehicle (per the Magnuson Moss Warranty Act (15 U.S.C. 2302(C)).

California residents

WARNING: This product can expose you to chemicals including nickel, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.