Generator Stator

Description

Brand new aftermarket stator
- Direct replacement to your original unit
- Plug-and-play, direct fit, easy installation
- Highest grade of lamination materials
- Highest grade of copper winding, resistant to 200 degrees Celsius
- Pick up pulsar coil included
- Connectors included
- Rubber grommet included
- Back Plate included
- All products shipped are tested

We have even included the opposite connector (main harness side) as we know these are often melted / corroded / defective and a major cause of repetitive electrical issues.

All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part.

Dimensions:
Interior diameter: 27 mm
Exterior diameter: 109 mm
Thickness: 32.6 mm
Length of wires stator to grommet: 135 mm
Length of wires grommet to plug: 410 mm
Length of pickup coil's wire to grommet: 135 mm

Other specifications:
Number of wires: 6
Number of plugs: 1
Number of pins: 6
Number of poles: 4
Wire to wire resistance:
Pickup: White/Blue to White/Red = 293 ohms +-20%
Source: Green/White to Black/Red = 858 ohms +-20%
Source: Black to Green/Blue = 53 ohms +-20%

Specifications

California residents

WARNING: This product can expose you to chemicals including nickel, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.