Harley Davidson Adventure/Touring Bike Drivetrain & Transmission Tools

Head Holder by JIMS®. Designed with a special guide alignment shaft that holds the right angle for the best possible installation. Save time andmoneyby installing the guides, in-line, with the valve seats, time and time again, for much...

Inner Cam Bearing Installation Tool by JIMS®. This tool easily presses the inner cam bearing smoothly into the right case, with the cases assembled, to the proper depth. Use a new JIMS performance bearing No.9058 and to remove old use...

Inner Primary Bearing and Seal Removal/Installation Kit by JIMS®. When it comes to servicing the inner primary bearing and seal, do it the JIMS way. This American made tool has a lifetime warranty and drives the bearing and seal...

Main Bearing Installer Tool by JIMS®. Use this tool to safely install a new main bearing using hand tools. This job can be performed with the transmission still in the frame. Tool will hold bearing square to it's bore, eliminating any...

Main Bearing Remover and Installer by JIMS®. The Milwaukee Eight™ engine uses a completely unique engine case main bearing. With this in mind, JIMS® is proud to introduce a main bearing remover and installer designed just for the...

Main Case Seal Installer by JIMS®. H-D's new 6-speed transmission is a very stout piece of engineering, incorporating some of the best bearings made. These main case bearings are of such high precision that you must be very gentle when...

Main Drive Gear Bushing Tool by JIMS®. Use to remove and install the main drive gear bushings, also to remove Big Twin cam bushing 1970- present. If you're looking for a quality product that will serve you for years to come, look no...

Main Drive Gear Installer Tool by JIMS®. Use this tool to safely install a new or newly repaired main drive gear. This job can be performed with the transmission still in the frame, with hand tools. This tool will hold the main drive...

Main Drive Gear Remover Tool by JIMS®. This tool removes the main drive gear from the main bearing correctly while in the transmission case. This eliminates the need of an arbor press and the risk of case damage.

Main Drive Gear Seal Installer by JIMS®. This tool is designed to properly align and install to the right depth, the main drive gear seal, H-D® No.12077 into the end of the gear. This can be performed while the assembled transmission...

Main Drive Gear Tool by JIMS®. Use to remove and install the main drive gear. Also installs the main bearing without removing transmission case. If you're looking for a quality product that will serve you for years to come, look no...

Main Seal Removal Tool by JIMS®. The Milwaukee-Eight® has a new crankshaft oil seal that is difficult to remove without potentially damaging the crankcase bore. The Main Seal Remover is designed to do the job right, with no chance of...

Mainshaft Bearing Race Tool by JIMS®. Use to remove and install the bearing inner race on the transmission mainshaft. If you're looking for a quality product that will serve you for years to come, look no further.

Mainshaft Replacement Bearing Plate by JIMS®. Use to remove and install the bearing inner race on the transmission mainshaft. If you're looking for a quality product that will serve you for years to come, look no further.

Mainshaft Sprocket/Pulley Locknut Socket by JIMS®. Heavy-Duty thick wall tube. Extra long two piece design, inner collar will retain wrench to nut for safer service work. 1-7/8" hex, 1/2" Drive. If you're looking for a quality product...

Motor Sprocket Shaft Seal Install Tool by JIMS®. Use to press oil seal over sprocket shaft into case. Use with No.97225-55. If you're looking for a quality product that will serve you for years to come, look no further.

Neck Bearing Tool by JIMS®. Including Tri Glide® trikes. A new frame design change in the steering head & neck bearings for Harley-Davidson® motorcycles necessitates a new installation tool. Pounding the races into place is simply not...

Primary Cover Inspection Plug Tool by JIMS®. This tool is used to remove and install the OEM style primary cover clutch adjuster access plug and filler plug without distorting the plug's slot. If you're looking for a quality product...

Primary Locking Bar by JIMS®. Use to lock primary for service work. This tool locks the primary drive on XL models to facilitate crankshaft sprocket nut removal and installation, along with clutch service. By shifting the transmission...

Primary Locking Bar by JIMS®. Use to lock primary for service work. Designed with precision and functionality in mind, this accessory ensures outstanding performance and easy use which makes it the perfect deal for your ultimate...

Universal Race and Bearing Install Tool Handle by JIMS®. This top-grade product is expertly made in compliance with stringent industry standards to offer a fusion of a well-balanced design and high level of craftsmanship. Manufactured...

Saddlebag Latch Rivet Tool by JIMS®. This new more affordable JIMS hand tool is for used to install rivets used on the H-D OEM Fiberglass Saddlebags and Tour Paks latch mechanism pieces. If you're looking for a quality product that will...

Shifter Mechanism Sleeve Remover and Installer Tool by JIMS®. This is a real time saver for removing and installing the shifter mechanism sleeve in Cruise Drive Big Twin transmissions. With this new tool, the sleeve (bushing) can be...

Sprocket Locker by JIMS®. Use to lock final drive sprocket, for removing and installing sprocket nut. Use with JIMS® tool No.94660-37A. If you're looking for a quality product that will serve you for years to come, look no further.

Sprocket Shaft Seal Installation Tool by JIMS®. This top-grade product is expertly made in compliance with stringent industry standards to offer a fusion of a well-balanced design and high level of craftsmanship. Manufactured from...

Starter Jackshaft Seal Installer Tool by JIMS®. This tool is designed to easily align and install the starter jackshaft seal (H-D® No.12066) without distorting or damaging the seal. This seal is located in the upper part of the inner...

Steering Head Bearing Race Installer by JIMS®. Use to install steering head races, stock and custom, as well as install cups in the frame. This tool pulls the races and cups in, straight and true, without any damage.

Steering Head Bearing Race Remover Tool by JIMS®. Use to remove and install steering head bearing race. Use with JIMS® spacer No.2388 and JIMS® Tool Handle No.33416-80 below. If you're looking for a quality product that will serve you...

Swing Arm Bearing Installer by JIMS®. Swingarm bearings must be installed and aligned accurately to avoid unsafe handling and ensure control of the motorcycle. Both drive side and brake side bearings, which are at different depths, can...

Timken™ Bearing Race Installer by JIMS®. Use to install bearing races in left crankcase. Use this precision tool to press in bearing races straight time after time (a must for the later engine case). For removal of Big Twin races, in...