1-1/4in x 3ft Fuel Fill Hose

Description

Gates Fuel Filler Neck hose is designed specifically for auxiliary gas tanks on recreational vehicles. It is an excellent replacement for passenger cars and trucks where a straight hose with minimal bend is required. Suitable for use with gasoline, gasohol blends of ethanol, methanol, ethers, diesel and biodiesel to B20 (up to maximum concentrations allowed by the EPA). Angled Fuel Fill Hose is designed for tank fuel fill connections where straight hose will not work.

For the past century Gates has been powering progress as one of the world’s leading parts manufacturers in the automotive industry, working with virtually every Original Equipment Manufacturer worldwide to design products for new vehicles as they are being developed. These strong relationships together with Gates commitment to continuous innovation enable us to offer a complete line of OE quality products for the Aftermarket. From Timing Belts to Micro-V Belts, Tensioners and Hose, for both import and domestic vehicles, install with confidence, install Gates.

Features & benefits

• Smooth oil resistant modified nitrile cover, tough synthetic knit textile cord reinforcement and petroleum-resistant nitrile tube
• Non-wire reinforced
• Offered in bent formed configurations and straight
• Meets SAE 30R6 or 30R7 (except oxidized gasoline test)
• Meets SAE 30R5 - Wall thickness is 4.47±1.42mm (0.176±0.056 inch) excluding embedded wire area
• Temperature Range: Gasoline Blends: -40 Deg. F to +212 Deg. F (-40 Deg. C to +100 Deg. C); Biodiesel B20: -40 Deg. F to +125 Deg. F (-40 Deg. C to +51 Deg. C)
• CAUTION: Not recommended for marine gasoline applications
• Direct replacement - this fuel filler neck hose is made to match the original equipment part on specific vehicles
• Durable construction - made of fuel-resistant materials to reduce future failure potential
• Regulatory compliant - built to meet emission and inspection standards
• Trustworthy value - backed by team of engineers and quality control experts in the United States

Specifications

Magnuson-Moss Warranty Act

Legally, a vehicle manufacturer cannot void the warranty on a vehicle due to an aftermarket part unless they can prove that the aftermarket part caused or contributed to the failure in the vehicle (per the Magnuson Moss Warranty Act (15 U.S.C. 2302(C)).