Brake Parts
Cooling Parts
Drivetrain & Transmission Parts
Electrical Parts
Engines Parts
Exhaust Parts
Foot Controls & Pegs
Frame & Body
Fuel Parts
Handlebars & Controls
Ignition System Parts
Mounts & Hardware
Performance Chips & Programmers
Racing Exterior & Body Parts
Starting & Charging Parts
Suspension Parts
Windshield & Fairings
Repair Manuals
Brake Parts
Cooling Parts
Drivetrain & Transmission Parts
Electrical Parts
Engines Parts
Exhaust Parts
Foot Controls & Pegs
Frame & Body
Fuel Parts
Handlebars & Controls
Ignition System Parts
Mounts & Hardware
Performance Chips & Programmers
Racing Exterior & Body Parts
Starting & Charging Parts
Suspension Parts
Windshield & Fairings
Repair Manuals
As the leader in forged racing pistons, JE Pistons has applied over 75 years of experience to its wide range of premium forged pistons for sport bike and other motorcycle engines. Engineered, forged and machined 100 percent in the USA, JE Pistons are designed for each specific engine and riding application to provide the ultimate combination of durability and performance. From the road course to the drag strip everything in between, JE Pistons' performance is proven with every handful of throttle and wave of the checkered flag. Equip your bike with the best in forged pistons.
JE pistons are all designed, forged, and machined in-house, allowing control over every step of the piston-making process. JE Pistons 7+ decades of experience in high-level racing has led to offering premium racing features, including full billet construction, EN plating, and purpose-designed coatings, to name a few.
| 2nd Groove Width | 0.032 in |
|---|---|
| 3D Undercrown Milling | No |
| Accumulator Groove | Yes |
| Anodize Top Ring Groove | No |
| Bore Diameter | 74.00 mm |
| Combo 2 | No |
| Compression Height | 0.907 |
| Compression Ratio | 0.54166666666667 |
| Compression Ratio Actual | 13.00:1 |
| Contact Reduction | No |
| Country Of Origin | USA |
| Cylinder Head | 5V 1000 |
| Double Pin Oilers | No |
| DVGP | No |
| Econo Undercrown Milling | No |
| EN Plating | No |
| Engine | YAMAHA |
| Engine Stroke | 2.283 in |
| Engine Type | ICE |
| Exhaust Angle | 11 |
| Exhaust Depth | .142 |
| Exhaust Diameter | 1.100 |
| Forging Type | FSR |
| Gas Distribution | No |
| Intake Angle | 15 |
| Intake Depth | .152 in |
| Intake Diameter | 1.000 in |
| Lateral Gas Ports | No |
| Mill Undercrown | No |
| Oil Groove Width | 0.05850 in |
| Oil Ring Thickness | 0.0585 in |
| Pin Fit | Yes |
| Piston Average Weight | 163 gr |
| Piston Head Type | Dish |
| Piston Material | 2618 |
| Piston Series | JE Pistons |
| Piston To Wall Clearance | -0.002499 in |
| Piston Volume | 0.00 cc |
| Product Market | Water & Snow |
| Product Type | Engine Piston Kit |
| Ring Set - Recommended | XA7400 |
| Ring Set Included | Yes |
| Ring Set Part Number | XA7400 |
| Second Compression Ring Thickness | 0.0320 in |
| Skirt Coat | No |
| Smooth Crown Finish | No |
| Thermal Crown | No |
| Top Compression Ring Thickness | 0.0320 in |
| Top Groove Width | 0.03200 in |
| Tuff Skirt | No |
| Ultra Dome | No |
| Ultra Groove | No |
| Ultra Groove Plus Gas Port | No |
| Vertical Gas Ports | No |
| Wrist Pin Length | 1.650 in |
| Wrist Pin Outer Diameter | 0.669 in |
| Wrist Pin Wall Thickness | 0.140 in |
30 Months
Legally, a vehicle manufacturer cannot void the warranty on a vehicle due to an aftermarket part unless they can prove that the aftermarket part caused or contributed to the failure in the vehicle (per the Magnuson Moss Warranty Act (15 U.S.C. 2302(C)).
WARNING: This product can expose you to chemicals including nickel, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
California carb status to be completed
CLOSE ✕
Subscribe to our newsletter to receive exclusive offers, product recommendations, expert tips and more.