Brake Parts
Cooling Parts
Drivetrain & Transmission Parts
Electrical Parts
Engines Parts
Exhaust Parts
Foot Controls & Pegs
Frame & Body
Fuel Parts
Handlebars & Controls
Ignition System Parts
Mounts & Hardware
Performance Chips & Programmers
Racing Exterior & Body Parts
Starting & Charging Parts
Suspension Parts
Windshield & Fairings
Repair Manuals
Brake Parts
Cooling Parts
Drivetrain & Transmission Parts
Electrical Parts
Engines Parts
Exhaust Parts
Foot Controls & Pegs
Frame & Body
Fuel Parts
Handlebars & Controls
Ignition System Parts
Mounts & Hardware
Performance Chips & Programmers
Racing Exterior & Body Parts
Starting & Charging Parts
Suspension Parts
Windshield & Fairings
Repair Manuals
COMP Cams' new 26953 dual valve springs are a product of innovative design and superior craftsmanship, with a lineage back to NASCAR competition. Engineered with state-of-the-art techniques and premium wire processing, they redefine reliability and consistency in the performance automotive aftermarket. The 26953 is geared towards race-oriented solid flat tappet and aggressive roller applications, with up to .750” lift at an installed height of 1.950”. They fit cylinder heads with at least a 1.550" spring pocket. Boasting an open load of over 575 pounds, these valve springs are designed for many endurance race applications with exceptional performance and durability.Whether you're seeking improved dynamics, enhanced valve control, or unmatched reliability, we have the valve springs to deliver the perfect solution. Elevate your engine's dependability and confidence on the road or track with COMP Cams valve springs
| Barcode | 00036584428466 |
|---|---|
| C.A.R.B. E.O. Number | N/A |
| Compatible Retainer | 780 Steel Retainers for 7° Locks and 3/8 Valves |
| Compatible Seats | 4781 Spring Seats for .570 Guide |
| Compatible Shims | 4757 Spring Shims |
| Country Of Origin | USA |
| Damper Spring Included | Yes |
| Dimensions | 24.5" x 2.87" x 2.75" |
| ID Of Inner Spring | .812 in |
| ID Of Outer Spring | 1.136 in |
| Installed Height | 1.950 in |
| Load At Installed Height | 200 lb |
| Load At Open Height | 575 lb |
| Maximum Coil Bind Height | 1.130 in |
| Number Of Springs Per Valve | 2 |
| OD Of Outer Spring | 1.560 in |
| Open Height | 1.200 in |
| Quantity | 16 |
| Recommended Max Lift | .760 in |
| Spring Rate | 500 ppi |
| Spring Type | Dual Spring |
| Valve Spring Finish | Raw |
| Weight | 6 lbs |
12 Months
COMP Cams® is the leading American manufacturer of high-quality, performance-based internal engine components, including camshafts, valve springs, rocker arms, lifters, pushrods, and other valve train components. We help our customers with innovative technological advancements through extensive research and development. Our quality workmanship and engineering ensure confidence for racers and street performance enthusiasts. COMP Cams is a proud member of the Edelbrock Group family of brands, which include Edelbrock®, FAST® (Fuel Air Spark Technology), TCI® Automotive, Russell® Performance and Lunati Power®. Headquartered in Olive Branch, Mississippi, COMP Cams remains an innovative American company focused on results-driven technology and superior customer support. We believe in the automotive lifestyle and continue to support the passion for our American pastime. For more information about the Edelbrock Group or any partner brands, visit www.edelbrockgroup.com.
Legally, a vehicle manufacturer cannot void the warranty on a vehicle due to an aftermarket part unless they can prove that the aftermarket part caused or contributed to the failure in the vehicle (per the Magnuson Moss Warranty Act (15 U.S.C. 2302(C)).
WARNING: This product can expose you to chemicals including nickel, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
CLOSE ✕
Subscribe to our newsletter to receive exclusive offers, product recommendations, expert tips and more.